1 Ãberschrift 1 - Audio Intervisual Design, Inc.

More documents

Recommendations

Info

2.4.7 Connecting the Water Cooling ATTENTION • Xenon bulbs from 4000 W onwards need water cooling for film gate and front gate. • You need a water flow of 2 to 3 l/min to get a water temperature of 18°C ± 2° C (64°F ± 10°F). • The water temperature should not be less than 16°C, because of condensed water in the projector. NOTE The installation of water cooling is described in the corresponding operating manual. 2-16 Issue: 10/2003
FP 30 EC II / FP 38 EC II 3 Function and Components 3.1 Description / Function The studio projectors of the series FP 30 EC II, FP 38 EC II and FP 38 EC-S II are extremely fast film projection devices for use on all sectors of film studio technology, as master print projection, mixing, synchronisation, print examination and video scanning. FP 30 EC II, FP 38 EC II and FP 38 EC-S II projectors are suitable to reproduce 35 mm films and sound. With FP 38 EC II and FP 38 EC-S II additionally you can project 16 mm films and sound. With FP 38 EC-S II it is possible to project Super 16 mm films. The intermittent sprocket is directly driven via a servomotor. The bottom and feed sprocket are driven via a toothed belt drive from an own servomotor. The projector can be equipped with film reels up to 600 m. The two electronic frictions are driven via directly flanged DC motors. The projector can operate with different projecting speeds (1 to 40 frames/second) forward and reverse. In shuttle mode it is possible to operate with speeds up to 300 frames/second (35 mm film) or 400 frames/second (16 mm film). The projector can also be used as a single projector or in change-over operation with a second one (master or slave). Depending on requirement you can configure the projector functions in a configuration program. The reverse-scan sound device is mounted on projector front side and is suitable to reproduce analog sound and digital sound DOLBY SR•D (35 mm sound). Both sound formats in shape of readers are combined in one equipment. The 16 mm sound device (option) is placed above the lens holder and is suitable to reproduce analog sound and magnetic sound (16 mm film). The projector can be equipped with a DTS or/and SDDS reader. Optionally the projector can be equipped with a video scanning unit. Operating Manual 3-17
Page 1 and 2: Operating Manual FP 30 EC II / FP 3
Page 3 and 4: Preface Dear customer, Thank you fo
Page 5 and 6: FP 30 EC II / FP 38 EC II Contents
Page 7 and 8: FP 30 EC II / FP 38 EC II 3.3 Syste
Page 9 and 10: FP 30 EC II / FP 38 EC II 5.6 Confi
Page 11 and 12: FP 30 EC II / FP 38 EC II 1 Safety
Page 13 and 14: FP 30 EC II / FP 38 EC II 1.2 Impor
Page 15 and 16: FP 30 EC II / FP 38 EC II 1.3.2.3 S
Page 17 and 18: FP 30 EC II / FP 38 EC II 2 Transpo
Page 19 and 20: FP 30 EC II / FP 38 EC II 2.3.3 Mea
Page 21 and 22: FP 30 EC II / FP 38 EC II Mains - D
Page 23 and 24: FP 30 EC II / FP 38 EC II 2.4.1.1 C
Page 25: FP 30 EC II / FP 38 EC II 2.4.4 Con
Page 29 and 30: FP 30 EC II / FP 38 EC II FP 38 EC(
Page 31 and 32: FP 30 EC II / FP 38 EC II 3.2.2.1.2
Page 33 and 34: FP 30 EC II / FP 38 EC II 3.2.2.3 F
Page 35 and 36: FP 30 EC II / FP 38 EC II 3.2.2.4 A
Page 39 and 40: FP 30 EC II / FP 38 EC II 3.2.4.1 P
Page 41 and 42: FP 30 EC II / FP 38 EC II 3.2.5 Int
Page 43 and 44: FP 30 EC II / FP 38 EC II 3.2.7 Sou
Page 45 and 46: FP 30 EC II / FP 38 EC II 3.3 Syste
Page 47 and 48: FP 30 EC II / FP 38 EC II This oper
Page 51 and 52: FP 30 EC II / FP 38 EC II 3.4 Elect
Page 53 and 54: FP 30 EC II / FP 38 EC II 3.4.4 Ext
Page 55 and 56: FP 30 EC II / FP 38 EC II 4 Operati
Page 57 and 58: FP 30 EC II / FP 38 EC II 4.1.2.1 D
Page 61 and 62: FP 30 EC II / FP 38 EC II Activate
Page 63 and 64: FP 30 EC II / FP 38 EC II SLOW/SLOW
Page 65 and 66: FP 30 EC II / FP 38 EC II 4.1.3 Fri
Page 67 and 68: FP 30 EC II / FP 38 EC II 4.1.4.2 S
Page 69 and 70: FP 30 EC II / FP 38 EC II 4.2 Opera
Page 71 and 72: FP 30 EC II / FP 38 EC II 4.2.2.2 1
Page 73 and 74: FP 30 EC II / FP 38 EC II 4.2.4 Ope
Page 75 and 76: FP 30 EC II / FP 38 EC II 4.2.7 Exc
Page 77 and 78:
FP 30 EC II / FP 38 EC II 5 Configu
Page 79 and 80:
FP 30 EC II / FP 38 EC II 5.3.3 Lea
Page 81 and 82:
FP 30 EC II / FP 38 EC II 5.3.4.5 S
Page 83 and 84:
FP 30 EC II / FP 38 EC II 5.3.4.13
Page 85 and 86:
FP 30 EC II / FP 38 EC II 5.5 Deact
Page 87 and 88:
FP 30 EC II / FP 38 EC II You have
Page 89 and 90:
FP 30 EC II / FP 38 EC II 5.6.4 DIP
Page 91 and 92:
FP 30 EC II / FP 38 EC II 5.6.6 DIP
Page 93 and 94:
FP 30 EC II / FP 38 EC II 6 Trouble
Page 95 and 96:
FP 30 EC II / FP 38 EC II 6.2.2 Fau
Page 97 and 98:
FP 30 EC II / FP 38 EC II 6.3 Clear
Page 99 and 100:
FP 30 EC II / FP 38 EC II 7 Cleanin
Page 101 and 102:
FP 30 EC II / FP 38 EC II 7.2.1.2 E
Page 103 and 104:
FP 30 EC II / FP 38 EC II 7.2.2 Fil
Page 105 and 106:
FP 30 EC II / FP 38 EC II 7.2.2.5 A
Page 107 and 108:
FP 30 EC II / FP 38 EC II lock nut
Page 109 and 110:
FP 30 EC II / FP 38 EC II 8 Parts a
Page 111 and 112:
FP 30 EC II / FP 38 EC II 6 11 10 7
Page 113 and 114:
FP 30 EC II / FP 38 EC II 8.2 Drive
Page 115 and 116:
FP 30 EC II / FP 38 EC II 8.3 Elect
Page 117 and 118:
FP 30 EC II / FP 38 EC II 46 48 47
Page 119 and 120:
FP 30 EC II / FP 38 EC II 60 Figure
Page 121 and 122:
FP 30 EC II / FP 38 EC II 8.5 16 mm
Page 123:
EC Declaration of Conformity Messrs
show all

1 Ãberschrift 1 - Audio Intervisual Design, Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?

1 Ãberschrift 1 - Audio Intervisual Design, Inc.