User Manual - Visionary Forces

MIC-1, MIC-2 (MICROPHONE AUDIO)
Two 3.5mm phone jacks on the front of the brain support two independent channels of balanced or
unbalanced microphone level analog audio inputs.
A
C B
Microphone Input Connector
PIN SIGNAL DESCRIPTION DIRECTION
A (TIP) IN + Mic Input (+48V Phantom Power) In
B (RING) IN - Mic Input (+48V Phantom Power) In
C (SLEEVE) GND Camera ground --
Microphone Level analog audio input signals are routed via a high quality pre-amplifier and soft limiter,
whose Gain may be controlled using the Input Level control to achieve the desired audio reference /
recording level. Microphone inputs support +48V @ 10mA Phantom Power as a user selectable option. If
To assist with reference level setup, the camera provides a color-coded Peak Level Meter in the
Graphical User Interface, with witness marks that indicate 0dBu (-20dbFS) and 0Vu (- 16dBFS) levels.
Peak Level Meter range is –36dBu to +20dBu (-54dBFS to 0dBFS) and provides input clip indication.
NOTE: A pre-fabricated XLR to TRS interface cable, Part Number 790-0229, is available from RED
Digital Cinema.
955-0002_v3.2, Rev-A1
COPYRIGHT © 2012 RED Digital Cinema
161