User Manual - Visionary Forces

Frame Rate: Current frame capture rate
Shutter Speed: Exposure Time (or Degrees)
White Balance: Color Temp
Resolution Record Resolution
Quality: REDCODE setting
Gen: Indicates presence of valid Genlock
signal
Sync: Timecode Jam Sync status
RIG: Indicates 3D rig metadata is present
LAN: Indicates communication via Ethernet
connection
Clip Filename: Filename of the clip that will
be shot
Media Status: Media location and remaining
media capacity in %
Project Frame Rate: Current project TIME
BASE
Clip Meter: RGB sensor RAW clipping status
HDR Mode: Displays HDRx mode status
Power: Indicates D.C supply voltage or % of
remaining battery capacity Including current
supply voltage
Audio Meter: Audio input selection and
levels
False Color Mode: Displays false color
overlay mode
Magnify: Tallies 1:1 if magnify is selected
Timecode: Current timecode value
Histogram: Displays histogram
TC: Indicates presence of valid SMPTE
timecode signal
NAVIGATING MENUS
The primary method to navigate Menus is via the Scroll Wheel on the REDMOTE or Side Handle. Rotate
clockwise to move right, counter clockwise to move left. However, the Left and Right direction Navigation
Keys (REDMOTE or Side Handle) or Adjustment Ring (Side Handle) may also be used for this purpose.
The Up and Down direction Navigation Keys provide additional navigation functions when pressed:
UP
Selects Advanced Settings menu.
DOWN Selects standard Settings menu.
As an example, position the Cursor under the Shutter Speed (24FPS) icon and press the UP Direction Key
to access advanced adjustment values for Shutter Speed.
52
COPYRIGHT © 2012 RED Digital Cinema
955-0002_v3.2, Rev-A1