User Manual - Visionary Forces

Adjustable parameters include LCD screen brightness; beep speaker Volume and Auto Shutdown time.
In the lower section of the display is the MAC address and the current firmware build of the REDMOTE
Brightness
The BRIGHTNESS control adjusts the LCD backlight intensity. Set value to maximum for daylight
visibility, set value lower for nighttime operation or for maximum battery run time when operating in
wireless mode.
Default value is Maximum.
Volume
The VOLUME control adjusts the loudness of the beep speaker. As you adjust this value the REDMOTE
will beep the speaker to give an audible confirmation of the selected volume. Default value is Minimum.
Auto Shutdown
The AUTO SHUTDOWN control adjusts the amount of time a REDMOTE will continue to operate when in
the wireless mode after no detected activity (i.e. no button presses are detected) before powering down.
Default value is OFF (REDMOTE will operate continuously until manually powered down.)
DISPLAY LAYOUT: SOFT MENU BUTTONS 4-8
To the right of the LCD are five Soft Menu buttons 4-8. These buttons select between a variety of
camera status page layouts.
Note: In Version 3.x software, buttons 7 and 8 are undefined.
Menu Button 4 Menu Button 5 Menu Button 6 Menu Button 7 & 8
190
COPYRIGHT © 2012 RED Digital Cinema
955-0002_v3.2, Rev-A1