User Manual - Visionary Forces

ADVANCED OPERATION: REDMOTE MENUS
SOFT MENU BUTTONS 1-3
Located below the main LCD display are three Soft Menu Buttons, who access advanced function
menus identified by text in the LCD directly above the corresponding button. These menus control
wireless connection (CONNECT), camera or local menus (REMOTE/LOCAL) and system setup (SETUP).
WIRELESS CONNECT: SOFT MENU BUTTON 1
Note: This Button is hidden if REDMOTE is attached to the camera or rear-most camera module.
Note: If a REDMOTE has previously been successfully paired with a camera, and the REDMOTE
has scanned the wireless network and found that camera, the following operation can be
bypassed as the REDMOTE will auto scan and connect to that camera each time it is powered ON
and undocked.
CONNECT REDMOTE TO A PAIRED CAMERA
NOTE: The following procedure assumes the camera has already been paired and named
DEFAULT under the camera’s SETTINGS > SETUP >REDMOTE and COMMUNICATION menus.
1. Press CONNECT to initiate a scan by the REDMOTE for available paired cameras in wireless range.
2. If the REDMOTE fails to find a camera it has been paired with the following screen will be displayed.
Select RESCAN and press the ENTER button in the Navigation Group to force a second scan for
paired cameras in wireless range. A wireless scan typically takes 20-30 seconds.
3. When REDMOTE finds a camera or cameras it has been paired with in wireless range, the name of
the available camera or cameras will be displayed - for example a single camera named DEFAULT.
955-0002_v3.2, Rev-A1
COPYRIGHT © 2012 RED Digital Cinema
183