Tata Indicab - Tata Motors Customer Care
Tata Indicab - Tata Motors Customer Care
Tata Indicab - Tata Motors Customer Care
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
IMPORTANT INFORMATION<br />
Service Schedule<br />
SR.<br />
NO.<br />
OPERATION<br />
FREQUENCY<br />
IN KM<br />
5000-5500<br />
10000-10500<br />
15000-15500<br />
20000-20500<br />
25000-25500<br />
30000-30500<br />
35000-35500<br />
40000-40500<br />
45000-45500<br />
50000-50500<br />
55000-55500<br />
60000-60500<br />
65000-65500<br />
70000-70500<br />
75000-75500<br />
80000-80500<br />
85000-85500<br />
90000-90500<br />
95000-95500<br />
100000-100500<br />
STEERING<br />
1 Check steering wheel (play, looseness) 10000 x x x x x x x x x x<br />
2 Check steering gear for looseness / leakages, pipelines, hoses 10000 x x x x x x x x x x<br />
3 Check tie rods ends (looseness, damage, wear) 10000 x x x x x x x x x x<br />
4 Replace power steering system oil and oil filter element 80000 x<br />
ELECTRICAL<br />
1 Check battery electrolyte (level, leakage & charging) 5000 x x x x x x x x x x x x x x x x x x x x<br />
2 Check wiring harness. Relay, fuses connections & functioning of electrical equipment 10000 x x x x x x x x x x<br />
(looseness, damage)<br />
3 Check functioning of lights, signals, indicators, guages, window winders, horn and central<br />
locking, etc. 10000 x x x x x x x x x x<br />
TRANSAXLE & CLUTCH<br />
1 Check oil level and top up if necessary (First at 5000 to 5500 kms & every 10,000 kms thereafter) 10000 x x x x x x x x x x<br />
2 Change oil 20000 x x x x x<br />
3 Check and tighten mounting bolts (First at 5000 to 5500 kms and every 10,000 kms thereafter) 10000 x x x x x x x x x x<br />
4 Inspection of drive shaft (C.V. joints) / boot damage 20000 x x x x x<br />
5 Inspection of clutch pedal height and cable (First at 5000 to 5500 kms and every 10,000 kms<br />
thereafter) 10000 x x x x x x x x x x<br />
6 Inspection of clutch slippage / drag and gear shifting (First at 5000 to 5500 kms and every<br />
10,000 kms thereafter) 10000 x x x x x x x x x x<br />
A. C. System<br />
1. Clean the fins of condenser with pressurized air and then with water<br />
(Ensure that the fins don't get damaged) Every Service x x x x x x x x x x x x x x x x x x x x<br />
2. Check A.C. belt tension, A.C. leakages, blower speeds & functioning<br />
of all control knobs 10000 x x x x x x x x x x<br />
136