Tata Indicab - Tata Motors Customer Care
Tata Indicab - Tata Motors Customer Care
Tata Indicab - Tata Motors Customer Care
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
STARTING & DRIVING<br />
Starting & Stopping<br />
STARTING THE ENGINE<br />
Before starting the engine :<br />
• Apply the parking brake fully.<br />
• Ensure that the gear lever is in neutral position.<br />
INDICAB CNG - PRECAUTIONS TO BE TAKEN WHILE STARTING<br />
1. Check whether the change over switch is in petrol or gas mode.<br />
The mode of operation is indicated on the dashboard instrument<br />
cluster. During first start in the day, the petrol mode start is<br />
recommended.<br />
2. To start the vehicle in CNG mode, ensure whether the previous<br />
stop was in petrol or gas mode. If the previous stop of the vehicle<br />
was in petrol mode, then use up the remaining fuel by bringing<br />
the switch to neutral position. Switch on to CNG mode when engine<br />
starves for fuel. The approximate time required is about 30 sec. If<br />
the previous stop was in CNG mode then the vehicle can be directly<br />
started in gas mode. This is required to ensure that there is no mix<br />
of gas and petrol in engine which will result in misfire.<br />
3. The above mentioned point has to be ensured during the running<br />
of the vehicle.<br />
4. While starting in CNG mode, the vehicle should be cranked only<br />
after the Green ‘LED’ light on the change over switch (Petrol to gas<br />
mode switch) goes off. The approximate time taken for the light to<br />
go off is 2-5 Sec.<br />
56<br />
Applied<br />
Released<br />
Choke<br />
Parking brake handle<br />
Change over switch