Tata Indicab - Tata Motors Customer Care

BEFORE DRIVING
Ventilation & Air conditioning
Maximum Cooling Effect :
Switch 'ON' the A.C. and keep the blower at maximum speed. Keep air
direction in face mode. All vents should be opened completely. Keep
the air circulation switch in the recirculation mode and temperature
control switch in the maximum cooling position.
Front Windshield Demister / Defrost :
First start the engine and accelerate to warm up. Select defrost/demist
mode on air flow direction control. Then set the blower to maximum
speed. These settings direct all air flow to the base of the front
windshield and towards front door glasses. The air clears the frost from
the windshield and door glasses.
Ventilator :
The air flow can be adjusted continuously with the rotary control knob
at the vents on the dash board. The air vents can be adjusted upward
and downward. Provision for fresh air is also available.
Front Windscreen Demisting
Close
Open
Note : Refrigerant charged in the air conditioning circuit has been
identified on the label over front body member. Use only refrigerant
as given in the label for topping up or recharge, i.e. do not charge
R12 (CFC) in the vehicle earlier charged with R134a (Non CFC) or
vice versa.
41