Tata Indicab - Tata Motors Customer Care
Tata Indicab - Tata Motors Customer Care
Tata Indicab - Tata Motors Customer Care
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MAINTENANCE & CAR CARE<br />
Starting the Engine with Jump Leads<br />
Connect leads in the order as shown in the sketch :<br />
• Do not connect the lead to the negative terminal of the<br />
discharged battery.<br />
• The connection of the -ve lead point should be as far away<br />
from the discharged battery as possible and close to the<br />
starter motor on engine/transaxle.<br />
• Route the leads so that they cannot get caught by the<br />
rotating parts in the engine compartment.<br />
• The engine of the car providing the jump start can be<br />
allowed to run during starting.<br />
Attempts to start the engine of the car with the discharged<br />
battery should be made at intervals of one minute and should<br />
not last more than 15 seconds. After starting, allow both<br />
engines to idle for approximately 3 minutes with the leads<br />
still connected.<br />
+<br />
Discharged<br />
Battery<br />
+<br />
_<br />
Body<br />
Earthing<br />
_<br />
Another Car Battery<br />
(Jump Start battery)<br />
Body<br />
Earthing<br />
94
Change language