Tata Indicab - Tata Motors Customer Care
Tata Indicab - Tata Motors Customer Care
Tata Indicab - Tata Motors Customer Care
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MAINTENANCE & CAR CARE<br />
Engine Cooling System<br />
Bleeding procedure for Cooling System :<br />
(For filling or reconditioning after complete draining)<br />
a) Fill coolant from the auxiliary tank (Branded premixed engine<br />
coolant) after ensuring all hoses are secured and leak proof.<br />
b) During filling, keep the bleeding screw on the hose from cylinder<br />
head to radiator loose.<br />
c) During coolant filling ensure that the air in the system is removed<br />
from this bleeding screw and only then tighten the screw, using a<br />
screw driver.<br />
d) Start the engine and slowly raise the engine speed and wait for<br />
the temperature to reach 85 o C-90 o C to allow the thermostat to open<br />
up. Engine running at idling speed, open the bleeding screw which<br />
is fitted on the hose between the cylinder head and radiator, by<br />
using a screwdriver to allow any trapped air in the system to escape.<br />
Tighten the bleeding screw and top up with coolant to max. level.<br />
Bleeding Screw<br />
Engine<br />
Radiator<br />
80