Tata Indicab - Tata Motors Customer Care

BEFORE DRIVING
Gauges
Headlamp leveling switch (if installed) :
A motorised headlamp leveling arrangement with the setting knob at
the dash board is provided on the LH side of steering column.
As and when required, head lamp leveling, setting is done by rotating
the knob to select one of the 3 levels marked in the switch depending
upon the loading of the vehicle.
Sl. No. Loading condition Sw. position/
Marks assigned *
1 One person in Driver seat 0
2 Driver + One passenger in front 0
3 Driver + One passenger in front +
All the seats at rear occupied
l
4 All the seats occupied l
5 All the seats at rear occupied +
Luggage in boot space to achieve
ll
permissible load on the rear axle**
6 Driver + Luggage in boot space to
achieve permissible load on the
ll
corresponding axle**
* Switch position / Marks assigned is for highest ULW.
** If the maximum permissible laden mass is obtained befire the
permissible load on the axle, the loading of the boot shall be limited to
the figure, which enables that mass to be reached.
36
1
0
2