INSTALLATION MANUAL

More documents

Recommendations

Info

General information Contacts Guide 9. Connecting to computer and data exchange Connection to the central computer (which has customized management software or Easycode or Starcode) can be achieved by serial port - RS232 to 115200 baud - or USB port. Connections by means of USB adapter devices for wireless 802.11g, or Ethernet are also possible. Managing files and data exchange can occur in the following manner: EASYCOD E PC a) Exchanging data with USB memory b) Serial connection c) Connecting via Ethernet d) Connecting via Wireless network RS232 USB-ETHERNET USB-WIRELESS Not all USB adapters are usable because there is no guarantee that the printer can manage their driver. Consult Eidos to create LAN and WLAN networks. USB MEMORY ELECTRONIC UNIT Swing 5.i – Connecting to computer and data exchange 24
General information Contacts Guide a) Exchanging data with USB memory The label texts drawn up on a PC outside the printer by means of software (EASYCODE) are communicated to the Printess by means of the USB memory key, which can also be used as a local data archive. The USB memory key does not need to be installed and can be considered to be an extra hard disk. CONNECTOR FOR USB MEMORY Swing 5.i – Connecting to computer and data exchange 25
Page 1 and 2: Code: RT542 Rev. D1 INSTALLATION MA
Page 3 and 4: General information Contacts Guide
Page 23: General information Contacts Guide
Page 39 and 40: General information General informa
Page 41: Guide Guide Surfing Contents t From

INSTALLATION MANUAL

Create successful ePaper yourself

Delete template?

Save as template?