INSTALLATION MANUAL

General information
General information
All rights to this manual are reserved. The reproduction, even partial, of this manual in any form is forbidden unless
express written permission is given by Eidos S.p.A.
The contents of this manual may be modified and improved without prior notice.
Every effort has been made to ensure the accuracy of the contents.
Please report any errors and/or inaccuracies to Eidos S.p.A. in order to make the manual as exhaustive as possible.
Eidos S.p.A. accepts no liability for any accidental error or for any consequent harm arising from the supply,
performance or use of this manual.
Documentation supplied
A series of tool that are supplied with the product and that simplify its use are an integral part of this manual:
Help on Line and Error Messages – on machine. Help on Line provides information on the specific selected
operations. Display must be enabled by the printer’s setup menu. The error messages provide an immediate
explanation of the error that has occurred and indicate the measures that must be taken to eliminate it.
Operator Manual – This is the paper document and it is designed to inform and assist the machine operator in matters
of routine operation and maintenance.
System Description and Configuration Manual – It is in hypertext format and contains the description of the
system and basic instructions on its operation.
Installation Manual – It is written for the installation technician in hypertext format. It indicates the procedures to be
carried out for correct installation and commissioning of the machine.
Maintenance Manual – It is written for electricians and fitters in hypertext form. It provides the information required
to perform special maintenance, diagnostics, updating and all the tasks that are not part of normal operation.
Easycode Programme – The demonstration version of the label management software is provided.
39