INSTALLATION MANUAL

More documents

Recommendations

Info

General information Contacts Guide • Key in Ctrl-C to interrupt the operation and obtain statistical data on the test: •Average acceptable durations of pings are 0 - 20 ms. •If after these tests some devices do not have good transmission quality, replace the antennas with which the Access Point are provided, in order to expand their capacity. The choice between omnidirectional antennas and directional antennas depends on the number of printers to be installed and on their arrangement. If the number of printers is reduced and it is possible to arrange them at a short distance from one another, direction antennas are recommended. If on the other hand there is a large number and/or the printers are arranged on an extended surface, it is preferable to use a pair of dipolar antennas. Attachments: • Configuring g the Access Point • Configuring the WI-FI Swing 5.i – Connecting to computer and data exchange 38
General information General information All rights to this manual are reserved. The reproduction, even partial, of this manual in any form is forbidden unless express written permission is given by Eidos S.p.A. The contents of this manual may be modified and improved without prior notice. Every effort has been made to ensure the accuracy of the contents. Please report any errors and/or inaccuracies to Eidos S.p.A. in order to make the manual as exhaustive as possible. Eidos S.p.A. accepts no liability for any accidental error or for any consequent harm arising from the supply, performance or use of this manual. Documentation supplied A series of tool that are supplied with the product and that simplify its use are an integral part of this manual: Help on Line and Error Messages – on machine. Help on Line provides information on the specific selected operations. Display must be enabled by the printer’s setup menu. The error messages provide an immediate explanation of the error that has occurred and indicate the measures that must be taken to eliminate it. Operator Manual – This is the paper document and it is designed to inform and assist the machine operator in matters of routine operation and maintenance. System Description and Configuration Manual – It is in hypertext format and contains the description of the system and basic instructions on its operation. Installation Manual – It is written for the installation technician in hypertext format. It indicates the procedures to be carried out for correct installation and commissioning of the machine. Maintenance Manual – It is written for electricians and fitters in hypertext form. It provides the information required to perform special maintenance, diagnostics, updating and all the tasks that are not part of normal operation. Easycode Programme – The demonstration version of the label management software is provided. 39
Page 1 and 2: Code: RT542 Rev. D1 INSTALLATION MA
Page 3 and 4: General information Contacts Guide
Page 37: General information Contacts Guide
Page 41: Guide Guide Surfing Contents t From

INSTALLATION MANUAL

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?