CEREC MC XL - MEDIPRO
CEREC MC XL - MEDIPRO
CEREC MC XL - MEDIPRO
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
7 Maintenance Sirona Dental Systems GmbH<br />
Milling instruments<br />
Operating Instructions <strong>CEREC</strong> <strong>MC</strong> <strong>XL</strong><br />
7.2 Milling instruments<br />
NOTICE<br />
Second bur set<br />
Second burr set<br />
The following information on the two but sets is only applicable if the<br />
second but set (optional) is also installed.<br />
7.2.1 Overview of materials and milling instruments<br />
The following table shows the two pairs of milling instruments, the positions<br />
where they must be inserted and the materials that can be milled with each<br />
instrument pair:<br />
Milling instrument<br />
"Left"<br />
Milling instrument<br />
"Right"<br />
Material<br />
"Step Bur 12 S" "Cyl. Pointed Bur 12 S" <strong>CEREC</strong> Blocs<br />
<strong>CEREC</strong> Blocs PC<br />
VITA MARK II<br />
VITA ESTHETIC LINE<br />
VITA TriLuxe Forte<br />
VITA TriLuxe<br />
IVOCLAR VIVADENT<br />
IPS Empress CAD<br />
IVOCLAR VIVADENT<br />
IPS Empress CAD Multi<br />
IVOCLAR VIVADENT<br />
IPS e.max CAD<br />
VITA In-Ceram<br />
ZIRCONIA<br />
VITA In-Ceram<br />
ALUMINA<br />
VITA In-Ceram SPINELL<br />
Merz artegral imCrown<br />
"Step Bur 20" "Cyl. Pointed Bur 20" Sirona inCoris ZI<br />
Sirona inCoris AL<br />
VITA In-Ceram YZ<br />
VITA In-Ceram AL<br />
IVOCLAR VIVADENT<br />
IPS e.max ZirCAD<br />
CAD-Waxx<br />
If you primarily process materials from one of the two groups, equip both bur<br />
sets with the same pair of milling instruments.<br />
61 46 885 D 3439<br />
40 D 3439.201.02.11.02 10.2009
Change language