CEREC MC XL - MEDIPRO
CEREC MC XL - MEDIPRO
CEREC MC XL - MEDIPRO
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
8 Technical description Sirona Dental Systems GmbH<br />
System requirements<br />
Operating Instructions <strong>CEREC</strong> <strong>MC</strong> <strong>XL</strong><br />
8 Technical description<br />
8.1 System requirements<br />
Working without the acquisition unit<br />
Working with the acquisition unit<br />
An inLab system PC is required to run this software. The hardware version<br />
must be PC Hardware A or higher.<br />
If you work with the acquisition unit, it must have the hardware status PC<br />
Hardware EA or higher.<br />
8.2 Milling unit<br />
8.2.1 General technical description<br />
Technical description of the milling unit<br />
• Digital feed control with force monitoring for extremely sensitive<br />
processing of ceramic materials<br />
• Process-controlled milling motors<br />
• Positioning step size: 6.25 μm<br />
• Milling repeatability: +/- 25 μm<br />
• Milling speed: 1.0 - 1.5 mm/min.<br />
Milling instruments (performance-monitored, backlash-free bearing)<br />
• Grain size: 64 μm<br />
• Speed: 42.000 rpm<br />
• Step Bur 12 S<br />
• Step Bur 20 (option, only in connection with inLab 3D software)<br />
• Cyl. Pointed Bur 12 S<br />
• Cyl. Pointed Bur 20 (option, only in connection with inLab 3D software)<br />
61 46 885 D 3439<br />
48 D 3439.201.02.11.02 10.2009