Download Catalogue (PDF - 38.2mb) - Carba-Tec

Drilling & Boring
10 PIECE MICRO DRILL SET
All with 2.3mm shanks. Sizes include: 0.5,
0.6, 0.8, 1.0, 1.2, 1.3, 1.5, 1.6, 2.0 and
2.2mm. 30g.
Order no.
Price
MDS-10PCE $14.00
20 PIECE MICRO DRILL SET
Set includes: 0.3, 0.35, 0.4, 0.45, 0.5, 0.55,
0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0,
1.2, 1.3, 1.4, 1.5 and 1.6mm. 40g.
Order no.
Price
MDS-20PCE $14.00
VERITAS ® SET OF 7 AUGER GIMLETS
Ideal for starting screws, auger gimlets have
a tapered screw tip and an auger body. The
seven sizes in the set range from 5/64” to
just over 3/16” (2mm to 5mm), which will
handle the pre-drill for screw sizes #2 to #9.
They are particularly useful for short screws
or screws in awkward places, both of which
present problems for power pre-drilling. In
tempered steel, ferro-blacked in the traditional
manner.
Order no.
Price
33J20-01 $20.00
6 PIECE SPADE
SET IN NYLON
ROLL
This handy set
of 6 spade
bits have
hex shanks.
Presented in
a nylon roll for convenient
storage. Set includes 10, 12,
16, 18, 20 and 25mm spade bits. Excellent
value. 275g.
Order no.
Price
SPADE-6NR $17.00
EXPANDING BIT
Easy, positive
adjustment for
hole diameter (22 -
76mm). Fully heat
treated for longer
life. For use in drill
presses only. 210g.
Made in Japan.
Order no.
Price
Z-2052 $55.00
SMALL
& LARGE
REAMERS
The small
r e a m e r
(3/16” to
3/4”) is useful
to rustic
furniture
makers for back-tapering holes for throughtenon
wedging (see diagram), as well as for
general tenon tapering, being complementary
to our pro taper reamer (05J61-01) because
of the overlapping size range. Firsttime
Windsor chairmakers will find the large
reamer (3/16” to 1-3/16”) indispensable for
tapering leg sockets. The bits are 3-3/8” and
5-1/2” overall respectively with a 5/16” hex
shank. The included angle of 12.8° on both
reamer bodies matches the tenons made
with the Veritas® Tapered Tenon Cutters. Designed
for use in an electric drill, these tools
may also be used in a traditional brace with
an adapter.
Order no. Description Price
05J62-05 Small $21.00
05J62-01 Large $25.00
5 PIECE TILE DRILL
SET
This fantastic set give you
all of the sizes needed to
drill tile or ceramic material.
Save by purchasing
as a set. Spade shaped
drills work quickly and effectively.
Set includes: 4, 5, 6, 8 and 10mm
bits. 145g.
Order no.
Price
GTD-5PCE $31.00
CHUCK EXTENDER
Hand drills are convenient but often are limited
in use because the bulk of the drill body
interferes with their utility. This 14” chuck
extender with 3/8” capacity keyed chuck
makes it possible to do many more things
with a hand drill. With it you can drill (or drive
screws) in areas that would normally be unreachable.
It also allows you to use a number
of accessories that would be unmanageable
if chucked directly in a drill.
Order no.
Price
09A01-60 $26.00
MAXICUT FORSTNER BITS
The one of a kind Rota Stop system give a
firm and positive lock in your chuck or extension
as well as a quick release. This rock solid
holding feature equals more accurate work.
Designed to cut instead of grind these bits
are well worth the price difference. Coupled
with the MAXICUT extension, shown below,
these bits can also be used in lathes when
drilling on end grain. Set includes: 15, 20,
25, 30 and 35mm. Made in Germany. 750g.
Order no.
Price
COLT-10801535 5 Set $169.00
1MT Rota
COLT-10800100 Stop Ext. $59.00
2MT Rota
COLT-10800200 Stop Ext. $59.00
KREG SHELF PIN JIG
If you’re adding shelf pin holes to an existing
piece of furniture or building shelves from
scratch, this Jig is the perfect tool for the job.
Unlike other shelf pin guides, the Kreg Shelf
Pin Jig features hardened steel drill guides
which ensure precise and straight drilling, so
you get solid 4-corner secure shelving.
Order no.
Price
KR-KMA3200 $47.00
Want to see more? See our website for our full range of products.
111