Download Catalogue (PDF - 38.2mb) - Carba-Tec

Machinery Accessories
CARBA-TEC ® STANDARD MITRE
GAUGE
Fits most cast table machinery with 3/4” x
3/8” mitre slots, or any of our 3/4” x 3/8”
mitre tracks.
Order no.
Price
MGT-01 $32.00
INCRA MITRE V27
Is engineered to provide high performance.
It’s no-nonsense design and compact size
make it the most affordable Incra mitre
gauge ever.
Order no.
Price
IN-MITERV27 $79.00
INCRA MITRE V120
Puts high resolution, repeatability and accuracy
within the budget or all woodworkers.
An incredible 120 angle stops are laser cut
into the steel protractor.
Order no.
Price
IN-MITERV120 $109.00
INCRA 1000HD MITER GAUGE
Combine a high-resolution protractor with
the industry’s smoothest adjustable miter
bar, a telescoping IncraLOCK Cut-off Fence
& Flip Shop Stop, and a steel vernier scale
that reads to 1/10° and you’ve got a winner
that will improve the quality of any project.
Order no.
Price
IN-MITER1000HD $239.00
DELUXE ALIGNMENT SYSTEM
Check table saw alignment, arbor shaft
run-out, blade and flange run-out and fence
alignment and straightness.
Order no.
Price
DAS-1 $109.00
4 5 6 8 12
VERITAS ® POLY GAUGE
This gauge, which is accurate to 1/2° on
every angle, can be used for many different
machines. Used flat, the gauge is ideal for
setting mitre fences or for layout work. Used
vertically, the slotted knob becomes a stabilising
base that holds the gauge erect so that
you have both hands free for adjusting and
locking a fence or blade. Ideal for frames,
tubs and planters, glued up cylinders for
turning, any job that requires precise setting
for 4, 5, 6, 8 or 12 sided mitres. Made from
brass and hardened aluminium, the gauge
measures 8-1/2” x 6” overall.
Order no.
Price
05N14-01 $51.00
MORTISE CHISEL SHARPENING KIT
Sharpens the inside of square chisels with a
6 flute HSS cutter. After sharpening the four
outside faces, the chisel should be deburred
using the flat diamond stone supplied. There
is no other successful way to sharpen this
type of chisel. An essential accessory for
all chisel mortisers. Suit 1/4”, 3/8” and 1/2”
chisels.
Order no.
Price
MCS-01 $59.00
CARBA-TEC ® 1/4HP JUNIOR
POWERFEED
This lightweight unit is nevertheless powerful
enough to feed stock into circular saws,
spindle moulders, sanders, routers and planers,
etc. The three rubber roller head can be
articulated vertically or horizontally to suit almost
any feeding job. Four feed speeds 5,
6.5, 8 and 11m/min are possible and give
this machine the versatility needed in almost
any home or small workshop. Motor is fitted
with forward and reverse switch. This power
feed will promote productivity in your shop
and provides added safety as well.
Specifications
Column Diameter
Max. Capacity under rollers
Reach
Roller Size
50mm
127mm
247mm
77mm
Order no.
Price
AF-32 $749.00
CARBA-TEC ® 1/2HP CABINETMAKERS
POWERFEED
This heavy duty unit has many characteristics
that enable it to feed stock into circular
saws, spindle moulders, sanders, routers
and planers, etc. With its high capacity for
holding, the three rubber rollers are suitable
for large workpieces. The three rubber roller
head can be articulated vertically or horizontally
to suit almost any feeding job. Four feed
speeds are possible 5.8, 9, 15 and 23m/
min, approx. only) and give this machine the
versatility needed in almost any professional
workshop. Motor fitted with forward/reverse
switch. This unit will promote productivity
and provide added safety too.
Specifications
Column Diameter
Max. Capacity under rollers
Reach
Roller Size
50mm
177mm
406mm
100mm
Order no.
Price
AF-308 $1,169.00
32
For more information & to shop online go to www.carbatec.com.au