Download Catalogue (PDF - 38.2mb) - Carba-Tec

Handtools & Handplanes
IBEX VIOLIN MAKER’S PLANES
Featuring curved & flat bottoms, precision
cast in silicone bronze. Body lengths
of 25mm, 30mm, 36, 46 and 60mm with
blade widths of 8mm, 10mm, 12mm, 18 and
22.5mm respectively.
Order no. Size Price
50501 25mm, round base $86.00
50502 30mm, round base $86.00
50503 36mm, round base $93.00
50553 36mm, flat base $97.00
50504 46mm, round base $103.00
50505 60mm, flat base $125.00
VERITAS ® SCRAPER HOLDER
Scraper bow is adjusted by the centre brass
knob. Takes the fatigue out of using straight
scrapers. Suitable for push or pull action. 6”
Scraper included. 250g.
Order no.
Price
05K33-01 $51.00
PURFLING CUTTER
Solid brass and wood. Adjustable purfling
cutter for manual rabbeting of guitar edges
and purfling of violins.
Order no.
Price
5067 $72.00
KUNZ #80 SCRAPER
Overall width: 290mm, Sole width: 85mm,
Sole length: 68mm. Blade can be curved by
tightening the central wing nut. This avoids
dig-ins on the edges of the blade.
Order no.
Price
KU-80 $52.00
VERITAS ® CABINET
SCRAPER
Used in place of a
much heavier belt
sander, it can clean a
dirty workbench top,
remove dried glue
an smooth a panel or
tricky grain table top
efficiently, leaving behind
a surface free of tear-out, digs or gouges.
The blade is 2-3/4” wide with both edges
ground at 45° so that the tool has two cutting
edges prepared at once. The sole is surface
ground for accuracy.
Order no. Description Price
05P32-05 Cabinet Scraper $88.00
05P32-06 Repl. blade $8.00
VERITAS ®
VARIABLE
BURNISHER
Woodworkers have
difficulty putting the
optimum hook on a
scraper for the job at
hand. Our Variable
Burnisher solves the problem and makes
burnishing easy. The unit has a carbide rod
in a brass hub at an angle. A dial on the face
of the body lets you set any angle from 0° to
15°. 220g.
Order no.
Price
05K37-01 $50.00
VERITAS ® BALL JOINT SCRAPER
For any major scraping task, nothing beats
a ball joint scraper. The handle can be set
anywhere in a 70° cone, allowing a comfortable
grip and effective blade orientation.
Available with a carbide or high carbon steel
(HCS) blade. The carbide blade is preferred
for paint scraping and the HCS is preferred
for finishing bare wood surfaces where
maintenance of a finely formed edge is more
significant.
Order no. Size Price
05K21-01 HCS Scraper $61.00
05K21-02 HCS Repl. Blade $13.00
05K21-07 HCS Blade Assembly $18.00
05K21-04 Carbide Scraper $72.00
05K21-06 Carbide Repl. Blade $11.00
Carbide Blade
05K21-05
Assembly
$28.00
VERITAS ® CHAIRMAKER’S SCRAPER
While this chairmaker’s scraper was designed
primarily for chairmakers’ use, it can
be used for any other scraping task in the
shop. The appeal of this tool is that it can be
used as is for scraping flat surfaces with the
included straight blade. For scraping round
pieces, additional blades are available: 1/2”
(12.7mm) concave, 7/8” (22.2mm) concave,
1-1/4” (31.7mm) concave, 1-1/2” (38mm) radius
convex.
Order no. Description Price
05P33-80 Chairmaker’s Scraper $72.00
05P33-81 Repl. Blade $12.00
05P33-82 1/2” Concave blade $12.00
05P33-83 7/8” Concave blade $12.00
05P33-84 1-1/4” Concave blade $12.00
05P33-85 1-1/2” Concave blade $12.00
05P33-88 Set of 4 blades $41.00
VERITAS ® TRI-BURNISHER
Designed to perform the functions of round,
triangular, and oval burnishers, this one has
a mirror finish to guarantee smooth hooks on
scrapers. The unique shape lets you apply
the right amount of pressure at each stage
of the process. Hardened to Rc 62 - 64, the
burnisher is much harder than the scrapers it
is used on. 120g.
Order no.
Price
05K32-01 $48.00
VERITAS ® CARBIDE BURNISHER
We made this carbide burnisher specifically
for curved scrapers and fine detail scrapers.
The 1/8” diameter polished carbide rod
projects 3/4” from the hardwood handle,
ideal for one-handed use. 100g.
Order no.
Price
05K20-30 $11.00
80 For more information & to shop online go to www.carbatec.com.au