Download Catalogue (PDF - 38.2mb) - Carba-Tec

Handtools & Handplanes
A. B.
C.
GROZ BLOCK PLANES
Cast Iron body and lever cap for durability.
Both planes have lateral adjustment levers.
Ground bases for accuracy in use. Planes
require final tuning before use. The 220N
has a 178mm overall length, 41mm cutter
idth and 21° blade angle. The 605N has a
157mm overall length, 35mm cutter width
and 13° blade angle.
Order no.
Price
GZ-220N $55.00
GZ-605N $55.00
GROZ #7
JOINTING
PLANE
Fitted with hardwood handles
and brass knobs. 75mm wide x 560mm
long. 4.2kg. Plane requires final tuning before
use.
Order no.
Price
GZ-39704 $139.00
LEE VALLEY PALM PLANES
These little beauties are made in Canada
and are expertly cast and ground. The ‘Squirrel
Tail’ planes (A and B) are similar to the
old Stanley #100 and #100-1/2. ‘A’ is a flat
plane while ‘B’ is curved with a 1-1/2” radius
side to side and a 12” radius front to back.
These two are 3-3/8” wide with a 1” blade - a
true pocket plane!
Order no. Description Price
A 15P10-10 Flat ‘Squirrel Tail’ Block Plane $59.00
15P01-02 Repl. Flat Blade $16.00
B 15P01-01 Flat ‘Little Victor’ Block Plane $55.00
15P01-02 Repl. ‘Little Victor’ Blade $16.00
C 15P10-20 Curved ‘Squirrel Tail’ Block Plane $65.00
15P10-21 Repl. Curved Blade $23.00
KUNZ COMPASS PLANE
A practical way of giving a smooth finish
to curved surfaces on window and door
frames, in furniture making or boat building.
The sole adjusts to convex or concave settings.
Width: 44mm. 1.7kg.
A.
B.
GROZ #4 & 5 SMOOTHING PLANES
Fully ground soles and sides, hardwood
handles, ductile cast iron construction and
tool steel blades. Planes require final tuning
before use. #4 has a 245mm overall length,
62mm sole width and 50mm blade width.
The #5 has 355mm overall length, 62mm
sole width and 50mm blade width.
Order no. Description Price
GZ-39701 #4 Bench Plane $55.00
GZ-39702 #5 Bench Plane $77.00
Order no.
Price
KU-113 $419.00
A. B.
A. KUNZ CAST IRON POCKET PLANE
B. KUNZ BEAVER TAIL POCKET
PLANE Plane length 85mm and cutter
width 24mm for both.
Order no.
Price
A KU-101 $32.00
B KU-100 $32.00
IRWIN BLOCK PLANES
The 060-1/2 has a screw adjusted cutter, being
pitched at 12-1/2°, is ideal for plastic laminates
or wood. This plane is also furnished
with an adjustable mouth; wide for coarse
shavings, and narrow for fine shavings from
awkward grain. The 09-1/2 completes the
range, being fitted with an adjustable mouth
and screw adjusted cutter, which has a lever
adjustment for lateral alignment. Both planes
have blades widths of 42mm.
Order no. Description Price
IRW-09-1/2 A. Standard Angle $169.00
IRW-060-1/2 B. Low Angle $169.00
A.
B. C.
WOODWORKERS STARTER SET IN WOODEN BOX
Set includes No. 4 (250mm) smoothing plane, low angle (175mm)
block plane, 160mm bevel, 210mm brass inlaid mortise gauge
and 280mm brass edged try square. Perfect for every beginner.
Presented in wooden storage case. 4.6kg.
Order no.
Price
CT-290115 $165.00
IRWIN BENCH PLANES
Irwin Record bench planes are divided into 3 types: Smoothing
plane, (04) for smoothing and final finishing. Jack plane, (05) four
inches longer than smoothing planes, are used for initial preparation
of rough timber. The long base, bridges the undulations a
shorter plane would tend to follow. Jointer plane (07) is an extended
Jack plane, where very long rough timber has to be prepared.
Order no. Description Price
IRW-04 A. #4 Smoother $169.00
IRW-05 B. #5 Jack $192.00
IRW-07 C. #7 Jointer $235.00
Want to see more? See our website for our full range of products.
79