Download Catalogue (PDF - 38.2mb) - Carba-Tec

Handtools & Handplanes
VERITAS ® SCRUB PLANE
The scrub plane is the tool of
choice for major stock removal,
the first step when flattening
rough stock by hand. Much like
a low-angle smooth plane, a scrub is not usually
used parallel to the grain, but at an angle
of 30° or more. The blade edge is ground
with a 3” radius, so that it takes an aggressive
cut. This is the tool you use to get stock
into a condition where you then can use a
smooth plane. The 3” radius of the 1-1/2”
wide by 3/16” thick blade gives a distinctive,
hand-worked texture to the workpiece.
This is a single-iron tool, meaning there is no
cap iron or chip breaker. Set screws along
the side prevent the blade from shifting sideways
when knots are encountered.
Order no. Description Price
05P35-01 Scrub Plane $154.00
05P35-05 Repl. blade $54.00
VERITAS ® SCRAPING PLANE
This is the ideal tool for final smoothing, especially
when you have to deal with highly
figured wood or reversing grain. Tearout is
virtually eliminated with the cutting action
of the included scraping blade. Blades are
2-7/8” wide and are hardened to Rc48-51.
The sole of the plane is surface ground for
accuracy.
Order no. Description Price
05P29-01 Scraping Plane $245.00
05P29-02 Repl. Blade $19.00
05P29-03 Opt. A2 blade $46.00
VERITAS ® CHISEL PLANE
Rabbet planes used to be widely available,
but are now being discontinued by manufacturers.
We developed this specialised plane
to convert a chisel into a rabbet plane. The
body is made of ductile cast iron and is configured
to hold a 1” bevel-edge chisel at a
45° angle, the same pitch as used on bench
planes. It becomes a small plane that works
equally well as a shoulder plane or rabbet
plane and can be used to clean up machinecut
rabbets and tenons. It works like a butt
mortise plane for cutting hinge gains. It will
also cut 1” dadoes and grooves up to a
depth of 3/8”. Precisely machined. Overall
size is 1-3/8” wide by 5-1/2” long by 2-1/2”
high. The clamping screw is solid brass.
While it excels as a job-site plane, it is equally
handy in the shop. 615g.
VERITAS ® CHAMFER GUIDE
You can convert our block plane into a chamfer
plane in seconds with this cunning new
guide. Easy to install, you first set the
chamfer width on the guide, then install the
guide by unscrewing the front knob of the
plane, replacing the toe piece with the
chamfer guide and tightening the knob
again. It is ready to go. Adjustable for chamfers
up to 1/2” wide, the guide wings are fixed
at 90 degrees angle to hold the plane body
at a consistent 45 degrees to the work face.
Made of anodised aluminium. Patented.
Order no.
Price
05P22-10 $30.00
VERITAS ® IRON EDGE TRIMMING
PLANE
Edge-trimming planes work end grain or
give final trimming cuts on jointed boards,
for smooth edges exactly 90° to the face.
This plane is cast in durable ductile iron for
everyday use, and is available in right and
left-hand models. 1-1/4” wide blade.
Order no. Description Price
05P03-01 Iron Edge Plane $144.00
05P03-02 Repl. blade $33.00
A.
C.
Order no.
Price
05P21-01 $67.00
B.
D.
VERITAS ® SMALL SCRAPING PLANE
Designed for one handed use, this small
scraping plane has an articulated arm rest
for a comfortable grip. The 2” wide, 0.040”
thick, high carbon steel blade occupies the
full width of the plane body permitting clean,
accurate cutting.
Order no.
Price
05P29-50 $164.00
VERITAS ® DETAIL RABBET PLANES
These slender pocket-size planes allow fine,
controlled cuts in areas you could ordinarily
trim only with a chisel. With very narrow
soles, they are also useful for cleaning dados
or grooves. Available in five widths: 1/4”,
5/16” (8mm), 3/8”, 6mm and 10mm.
Order no. Description Price
05P75-03 1/4” Imperial $82.00
05P75-06 5/16” Imperial $82.00
05P75-08 3/8” Imperial $82.00
05P75-01 6mm Metric $82.00
05P75-10 10mm Metric $82.00
VERITAS ® DETAIL PALM PLANES
With a height-adjustable palm rest for better
in-hand registration, these miniature planes
are easily manoeuvred and permit fine, controlled
cuts. The investment-cast steel body
has a 45° bed angle and a fixed mouth, and
uses a brass retention screw to secure the
included 30° bevel A2 blade (0.06” thick by
9.5mm wide). The soles are approximately
38mm long by 15mm wide.
Order no. Size Price
05P90-01 A. Flat $75.00
05P90-13 B. Concave $75.00
05P90-05 C. Double Convex $75.00
05P90-09 D. Convex $75.00
78 For more information & to shop online go to www.carbatec.com.au