Download Catalogue (PDF - 38.2mb) - Carba-Tec
Download Catalogue (PDF - 38.2mb) - Carba-Tec
Download Catalogue (PDF - 38.2mb) - Carba-Tec
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SPECIALS - Instore & Online<br />
Changing the way<br />
things are done<br />
VERITAS ® BEVEL GAUGE<br />
Features seven individual slots to measure<br />
the most commonly used angles from 15°<br />
to 45° in 5° increments. 19mm deep slots for<br />
good registration. The pocket-sized disc is<br />
63.5mm in diameter and has a center hole<br />
for hanging it on a nail. Made of solid brass<br />
that will not damage a honed edge. Made in<br />
USA.<br />
50K09-01............................ RRP $13.00<br />
SALE $10.00<br />
VERITAS ® SUPER HARD SCRAPER<br />
SET<br />
Most scrapers are sheared from spring steel,<br />
hardened to Rc38-42. These scrapers are<br />
harder - Rc48-52 - and hold an edge longer.<br />
They are also fully milled to a square, sharp<br />
90° ready for immediate use on fine work.<br />
Two are 2” x 6”, two are 2-3/8” x 6”.<br />
05K30-10............................ RRP $23.00<br />
SALE $19.00<br />
VERITAS ® CABINET SCRAPER<br />
Used to clean a dirty workbench top, remove<br />
dried glue, smooth a panel or a tabletop<br />
with a difficult grain and leaves behind a<br />
surface free of tear-out, digs or gouges.<br />
Improvements over the traditional #80<br />
cabinet scraper include a 2-3/4” (70mm)<br />
width blade, with both edges ground at 45°<br />
so that the tool may have two cutting edges<br />
prepared at once.<br />
05P32-05............................ RRP $88.00<br />
SALE $79.00<br />
TEKNATOOL ® SHARPENING SYSTEM<br />
• Transforms your standard bench grinder<br />
into a precision grinding and sharpening<br />
machine, without the cost.<br />
• Combines the slideway grinding jig<br />
and the powerful finger grind jig (solid<br />
separately) into one versatile sharpening<br />
tool.<br />
• Utilises a sturdy platform and a unique<br />
sliding base to achieve the ultimate in<br />
sharpening.<br />
• Slideway is also used to precision dress<br />
the grinding wheel essential for perfect<br />
grinding results.<br />
TK-35018........................... RRP $179.00<br />
TEKNATOOL ®<br />
FINGERNAIL<br />
JIG<br />
The NOVA Finger<br />
Jig Unit uses<br />
an extruded<br />
aluminium base<br />
with quick cam<br />
lock release via<br />
a comfortable<br />
rubber handle.<br />
The same finger<br />
jig as on the<br />
Nova Sharpening Centre is used, with the<br />
same tru-track ball, lightweight but strong<br />
design.<br />
PAINTER’S PYRAMIDS<br />
These simple supports are quick to set up,<br />
non-marking, and compact to store. Moulded<br />
from a solvent-resistant polymer, they will not<br />
react with finishes or wood. Each support is<br />
50mm high and has a load rating of 90kg.<br />
88K58-70.............................. RRP $9.00<br />
SALE $7.00<br />
ROCKLER<br />
SILICONE GLUE<br />
BRUSH<br />
This brush features<br />
silicone bristles that<br />
are easy to wash with<br />
water, and quickly<br />
shed dried glue for<br />
longlasting service.<br />
ARCHER LEATHER CHISEL ROLL -<br />
12 PLACE<br />
A quality leather roll that protects and stores<br />
our chisels for later use. Suits carpenters<br />
and carvers chisels. Weight: 520g.<br />
AR-12.................................. RRP $37.00<br />
SALE $29.00<br />
DIGITAL ANGLE FINDER<br />
Why bother measuring and estimating<br />
angles with a handgauge when you can use<br />
this digital tool to provide quick, precise<br />
angle readings on your tablesaw.<br />
AFB-15................................ RRP $59.00<br />
SALE $49.00<br />
POLYPROPYLENE SHIMS<br />
Accurately made in a range of thicknesses,<br />
these polypropylene shims can be used<br />
individually or stacked in combinations for<br />
a precise fit, saving time and eliminating<br />
guesswork when spacing, plumbing or<br />
levelling. Assortment includes 1/32”, 1/16”,<br />
1/8” and 1/4” thick shims (10 of each).<br />
SALE $159.00 RK-45624..............................RRP $8.00 27K07-45............................. RRP $10.00<br />
SALE $6.00<br />
SALE $9.00<br />
TK-35053........................... RRP $129.00<br />
SALE $115.00<br />
ROUTER MAT<br />
Stops those tricky jobs from running away<br />
from you. Sand, carve, plane or rout on<br />
this slip resistant mat. Also suitable for a<br />
multitude of domestic uses. Measures 610 x<br />
910mm.<br />
P-2436................................. RRP $11.00<br />
SALE $9.00<br />
For more information & to shop online go to www.carbatec.com.au<br />
141
Change language