AIR CONDITIONING

3.2 Operational elements - C7000 Plus 2
= On/off key
SET = Set key
= Up arrow key
= Down arrow key
Display
MENU = Menu key
ESC = Escape key
On/off key
SET key
Up/Down arrow keys
MENU key
ESCape key
Display
The A/C unit is switched on/off with this key.
You enter the submenus, access the change mode for parameters and confirm parameters
with this key.
You can scroll the menus and change parameters with these keys.
With this key you access the log-in mode to start the communication between the terminal
and the I/O controller of an A/C unit.
You shift to the next menu one level above with this key.
The display consists of 4 lines with 20 characters each.
The headline always contains the menu name (except in the top level where it contains
the version number) and the unit ID of the IOC.
Operation - Navigation through the menus
Three symbols help you to operate the terminal:
→
+
←
- shows your current position
- indicates the parameters which can be modified
- indicates the change mode of a parameter
With the arrow keys you select the submenu to which you want
to come or the parameter you want to modify.
With the SET key you get into the submenu or into the parameter
change mode.
To change the Set temperature in the right window, hold the Set
key until the right arrow changes into a left arrow.
The parameter can now be changed with the arrow keys in
steps of 0,1 Kelvin.
Press the SET key to confirm the modification.
Press the ESC key to leave the menu and return to the menu
one level above.
V1.32 □ 27
Info
→Control
Service
Control □ 27
→Temperature
Humidity
Function
../Temperature □ 27
→Set 22,0 °C
+Nightset 27,0 °C
+Room min 18,0 °C
../Temperature □ 27
←Set 22,0 °C
+Nightset 27,0 °C
+Room min 18,0 °C
../Temperature □ 27
→Set 24,0 °C
+Nightset 27,0 °C
+Room min 18,0 °C
E/1006/57/19