AIR CONDITIONING

C7000 Advanced
Info
Runtimes
The runtimes of the listed components
are shown in hours in the following windows
at the bottom of the page.
C7000 PT2
The functional runtimes in detail:
The unit runtime comprises all times when
at least one component is operating.
The stoptime is counted when the unit is
in local stop or timer stop or remote stop
or bms-stop.
The cooling runtime is counted each time
when cooling is requested.
The heating runtime is counted each time
when heating is requested.
The humidification runtime is the total
runtime of all humidifiers.
The dehumidification runtime is counted
each time the solenoid valve for cutting a
part of the evaporator is activated/closed
or the fan speed is reduced for dehumidification
reasons (DX-size 1 and all
CW-units).
The functional runtimes include the
same components as for the C7000
Advanced.
Info/Runtimes □ 27
→U.start 180 h
U.stop 120 h
U.cooling 125 h
U.heating 123 h
U.humi 145 h
U.dehumi 260 h
Event-Log
All alarm messages and events of one A/C
unit are listed in this window. The messages
contain the following information:
alarm text, day and time. When the unit
was started and stopped is also displayed.
Up to 200 events can be stored.
Info/Events □ 27
→13.11 Start
12.11 Unit on
11.11 Unit off
System
In this menu the software version, the
hardware version and the unit type are
displayed.
The field "more" shows that there is another
window.
Here the number of connected EAIO-,
EDIO- and EBUS-boards is indicated, the
same as optional extensions of the software.
E/1006/57/37