AIR CONDITIONING

C7000 Advanced
Info
C7000 PT2
Info □ 27
→Actual
Status
Runtimes
Events
Alarm
Current values
This window shows the actual values of
the connected sensors the same as the
setpoints adjusted at the controller.
Furthermore the setpoints shifted by the
controller (CORR.) are displayed. These
setpoints are due to the week cycle
program (see page 84) or by the sensor
limitation control (see page 81). The shifted
setpoints are priority setpoints.
Here you can see the measured values
for the zone. These values represent an
average value for each parameter, which
is calculated of all sensors of the units
which are assigned to the same zone.
These are the measured values for the
unit.
These are several sensor values of the
unit.
visible window - display size
Info/Actual □ 27
→Temp 24,1 °C
Humidity 45,3 %rh
Set 24,0 °C
Set 45,0 %rh
Set corr 24,2 °C
Set corr 44,7 %rh
Z.room 24,1 °C
Z.room 45,3 %rh
Z.supply 14,5 °C
Z.supply 43,9 %rh
U.room 26,8 °C
U.room 47,8 %rh
U.supply 15,8 °C
U.supply 42,8 %rh
Water 1 7,8 °C
Water 2 9,8 °C
Outside 27,8 °C
Outside 65,3 %rh
Conden 1 19,5 bar
Conden 2 18,5 bar
Conden 1 42,7 °C
Conden 2 35,7 °C
Evap 1 5,5 bar
Evap 2 6,5 bar
Evap 1 8,4 °C
Evap 2 9,4 °C
The complete menu can be scrolled with
the up and down arrow keys.
E/1006/57/35