NI 43-101 Technical report, Surface diamond drilling ... - Iamgold
NI 43-101 Technical report, Surface diamond drilling ... - Iamgold
NI 43-101 Technical report, Surface diamond drilling ... - Iamgold
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
R a r e E a r t h E l e m e n t E x p l o r a t i o n P r o g r a m M a r c h - 2 0 1 3<br />
W i n t e r - S u m m e r 2 0 1 2 P a g e | 129<br />
3.7<br />
Mining factors<br />
or<br />
assumptions<br />
Were any assumptions made regarding<br />
possible mining methods, minimum mining<br />
dimensions and internal (or, if applicable,<br />
external) mining dilution?<br />
[It may not always be possible to make<br />
assumptions regarding mining methods and<br />
parameters when estimating Mineral<br />
Resources. Where no assumptions have<br />
been made, this should be <strong>report</strong>ed.]<br />
CIM- (<strong>43</strong>-<strong>101</strong>-Item<br />
25)<br />
JORC- (Sect C:<br />
Criteria 7)<br />
SAMREC-(Sect C:<br />
Criteria 5)<br />
SME-(Criteria D)<br />
No,<br />
LG, JFT<br />
3.8<br />
Metallurgical<br />
factors or<br />
assumptions<br />
Were the sources for assumptions or<br />
predictions regarding metallurgical<br />
amenability clearly stated?<br />
[It may not always be possible to make<br />
assumptions regarding metallurgical<br />
treatment processes and parameters when<br />
<strong>report</strong>ing Mineral Resources. Where no<br />
assumptions have been made, this should be<br />
<strong>report</strong>ed.]<br />
CIM- (<strong>43</strong>-<strong>101</strong>-Item<br />
18)<br />
JORC- (Sect C:<br />
Criteria 8)<br />
SAMREC-(Sect C:<br />
Criteria 6)<br />
SME-(Criteria D)<br />
Yes, Item 18,<br />
Predictions were made<br />
from ungoing<br />
metallurgical tests,<br />
LG, JFT<br />
If assumed, were the sources for bulk density<br />
assumptions clearly stated?<br />
CIM- (<strong>43</strong>-<strong>101</strong>-Item<br />
14)<br />
Yes, Item 19<br />
3.9 Bulk density<br />
If determined, was the method used clearly<br />
stated (e.g. whether wet or dry, the frequency<br />
of the measurements, the nature, size and<br />
representativeness of the samples)?<br />
JORC- (Sect C:<br />
Criteria 9)<br />
SAMREC-(Sect C:<br />
Criteria 7)<br />
SME-(Criteria B.3)<br />
LG, JFT<br />
Was the basis for the classification of the<br />
Mineral Resources into varying confidence<br />
categories denoted?<br />
CIM- (<strong>43</strong>-<strong>101</strong>-Item<br />
19)<br />
JORC- (Sect C:<br />
Criteria 10)<br />
Yes, Item 19,<br />
LG, JFT<br />
3.10 Classification<br />
Have all other relevant factors been taken into<br />
account and <strong>report</strong>ed? (I.e. relative<br />
confidence in tonnage/grade computations,<br />
confidence in continuity of geology and metal<br />
values, quality, quantity and distribution of the<br />
data.)<br />
SAMREC-(Sect C:<br />
Criteria 8)<br />
SME-(Criteria C.2)<br />
Yes, Item 19 and 21<br />
LG, JFT<br />
Do the results reflect the Competent/Qualified<br />
Person(s)’ view of the deposit?<br />
Yes, Item 19<br />
LG, JFT<br />
3.11<br />
Audits or<br />
reviews<br />
Are there any audits or reviews of the Mineral<br />
Resource estimates, and have the results<br />
been <strong>report</strong>ed.<br />
Has the date of the last independent audit<br />
been specified?<br />
CIM- (<strong>43</strong>-<strong>101</strong>-Item<br />
19)<br />
JORC- (Sect C:<br />
Criteria 11)<br />
SAMREC-(Sect C:<br />
Criteria 9)<br />
SME-(Criteria B.1,<br />
B.3 & H)<br />
No,<br />
LG, JFT<br />
No,<br />
LG, JFT<br />
3.12<br />
Discussion of<br />
relative<br />
Was a statement made regarding the relative<br />
accuracy and/or confidence in the Mineral<br />
CIM- (<strong>43</strong>-<strong>101</strong>-Item<br />
19)<br />
Yes, Item 19<br />
3400, chemin du Columbium, St-Honoré-de-Chicoutimi, QC G0V 1L0 Canada – tel. : 418 673-4694 Fax : 418 673-3179<br />
E-mail : info.niobec@iamgold.com www.niobec.com
Change language