Tender Document for Repowering Project of Ghorasal 3rd Unit - BPDB

maintenance of Gas Turbine Generating Unit, Steam Turbine Generating
unit, HRSG and other plant equipment inclusive of routine, scheduled as
well as emergency use that takes place in the course of operation of the
plant during warranty period (24 months) which are mandatory. It may be
mentioned that Tenderer must quote in Schedule-F in full quantity and also
additional items & quantity necessary as stated in Tender Document,
otherwise Tender shall be rejected. During the warranty period of 24
months, the Contractor shall supply all necessary equipment, spare parts,
materials/consumables etc. at his own cost and whether it is listed or not in
in Schedule-F, Vol. 2 of 2 Part B Tender Documents. In preparation of the
list the tenderer have to consider plant factor as 80%. During the warranty
period the Contractor have to conduct (providing all required spare parts
and service) at least 1(One) CI for Gas Turbine and at least one Inspection
for other equipment and any other maintenance work for force outage.
Spare parts & consumables to be supplied for warranty period under the
Contract must be made available at site before start of testing.
2.26 Special Maintenance Tools
The contractor shall provide all special tools including a boroscope set
required for maintenance of the GTG Unit(s),GBC(s) and other equipments
hand them over in good condition to the BOARD. A list of all such tools
shall be incorporated with tender. Contractor shall not be permitted to use
any equipment/ machinery/ tools, which are to be supplied under the Contract.
2.27 Electrical workshop tools
Current injection test set, Megger(HV: 2.5 to 6 KV, LV: 250V,500V,1000V),
Multimeter, Level Gauge(600mm), Mega Ohmer(ZC-25B), Portable
Millammeter(BMA-1), Mimmivoltmeter(BMV-1), Wire Buffing
Machine, Hand Shares, Hydraulic Press(5 Ton), Pneumatic, Grease
Gun, High Pressure Water Claener, Bearing Puller Kit, Bearing heater,
Pistol Drill(medium), Temperature Probe, Power Meter Set(Include: Phase
Rotation Meters, AC&DC Ammeters), Micrometers(Small, Medium and
Large), Hydrometer, Tachometers, Hydraulic Crimpers, Insulating Oil
Tester, Heat Gun, Portable Air blower, Portable Vacuum Cleaner,
Ladder(Medium), Drawing, Consumable, Equipment Storage
Cabinets(suitable sizes), Work Benches, Hand Equipment Trolley, Power
Frequency LV, SF6 Gas Detector, Loss Factor Meter, Primary Current
Protection Injection test Set etc.
2.28 Machine Shop equipment & Tools- Deleted
Laboratory Equipment (Testing Bench):
Pressure Meter (0-60 kgl m 2 ), Temperature Meter (0-150 0 C-PT50, 0-150 0
C-PT100)
2.29 Chemical laboratory with standard apparatus for Combined cycle
Power Plant
Necessary laboratory instruments, glass wares, laboratory test reagents
essential for the process control and quality control of the Chemical plant
shall be supplied by the contractor as per needs
Re-Powering Ghorasal 210 MW 3 rd Unit (Vol-2A of 2) 28