Untitled - Wood Tools

TRAY
Given the "drop-down" design of the trays,
there are r\,vo things to keep in mind when
mounting them under the cabines.
First, to allow the trays to tilt all the way
down,you'll need to clip one ofthe"wings"
J
fr
J
offeach shelf support (Photo, above).
Second, the storage tray and rail assembly
must be installed as a single unit. Ifyou were
to attach the rail assembly first,you wouldnt
be able to insert the tray from the front.
(The filler strips in the grooves in the rails
would prevent it.) So slide the tray into the
opening in back of the rail assembly (F(.
1).Then attach the encire unit, as shown in
Fig.2 and add the false front (Figs. j and 4).
ATo instoll the troys, clip one "wing" A Next, olign the unit under the cobinet
off eoch shelf support. Then instoll the ond clomp it in ploce. Now pull out
supports ond slide the troy into the the troy to occess the mounting plote
opening in bock of the roil ossembly. ond screw the unit in ploce.
A Finolly, olign the folse fronts on the
troys with doublesided tope (Fig. 3).
Attoch them by running screws through
the troy front ond into the folse front.
Our kirchen cobinets hod o fot bottnm for mounting
the hoys. A cobinetwith o foce home, however, will
hove onyrhere from o 1/2" b I " recess underneoth
(lllustrotion, right). You'll need to fill this recess
before mounling the hoy. To do this, screw o plywood
filler pod into the bose of the cobinet. Nole:
You moy need to odd spocers frc moke it fit fush with
the boftom of the foce frome.
Once the filler ond
spocers ore otioched,
mount fie troy to the
cobinethe some woy
os bebre-bydrMng
screws up through the
mounting plote ond
into the filler pod
(Mounting Detoill.
#6 Fh #6x3h" Fh
Screw Woodscrew
Recess
Foce undemeoth
wol{KBENCH D.JuNa 2004 73