Elegant Entry Divider - Wood Tools

BLACK & DECKER
Dragster Belt Sander
Black & Deckert radical new Dragster belt sander may
represent the first sigruficant improvement to belt sanders
in the S0-plus years they've been around.
The Dragster features a low-profile front wheel that
delivers 25 percent more sanding suface than prevrous
3' x 27'models and allows the sander to get three rimes
closer to the edge ofadjoining sufaces (floor to baseboard,
for instance). Additionally, a retractable hood
exposes the top of the sanding belt for use in a
variety of applications, including squeezing into
spaces where belt sanders couldn't possibly reach
before (Photo, above). Finally, a three-position
adjustable handle maximizes user control and comfort.
The Dragster sells for around 970. Visit
BlackAndDecker.com, or call 800-544-6986 for more.
HITACHI
'12" Digital Miter Saw
\ffiffif,
o^:
The Drogster's
low profile offers
more sonding
surfoce, better
occess to
corners, ond the
obility to reoch
into tight spots.
a--\;
A new miter saw from Hitachi (Model C12LCH) offers
the latest in power tool technology with a digital liquid
crystal display (LCD) that shows the bevel and miter
angle of the saw.
The LCD readout indicates angle settings in half of
a degree (.5') through most of the range of adjustment.
But it also indicates the specific angles for cutting crown
molding flat (31.6" miter,33.9o bevel). Such precise setups
are much easier thanks to a microadiusrment knob on the
bevei lock (Photo, below). The saw also
features a laser cut line for quick aligr:rment.The
CIZLCH sells for around
$399.Visit HitachiPowerTbols.con\
or call 800-829-
4752 for rnote
information or to
Iocate a retailer in
your area.
An LCD
disploy tokes
the guesswork out
of compound miter
cuts, like setting up to cut
crown molding, os shown here.
A loser cut-line indicotor fieft/ ond o
microodiustoble bevelock (below) turther
ensure occurote, repeotoble setups.
57