4 - Certificazione energetica edifici
4 - Certificazione energetica edifici
4 - Certificazione energetica edifici
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Aluminium radiators<br />
•Aluminium radiators<br />
- High radiant power radiators, made by high-pressure die-casting<br />
special aluminium alloy.<br />
- Thermal emission is optimized thanks to bigger convective fins with<br />
respect to wet surfaces.<br />
- Maximum operation pressure: 10 bar<br />
- Battery inspection through hydropneumatic system.<br />
- The radiators are suitable both for standard and single-pipe systems.<br />
- Fitted with 1” Ø connections allowing direct assembly of the valves in<br />
single-pipe systems.<br />
- Paint covering is protected by a thermo retractile polyethylene film.<br />
• Installation and Maintenance<br />
- Minimum distances from the wall and from the floor are approximately<br />
30 mm. and 120 mm. respectively.<br />
- In the event of under recess installation, a space of 100 mm. upwards<br />
shall be kept.<br />
- Make sure that the filling water hardness is lower than 15°F with a Ph<br />
ranging from 7 to 8.<br />
- Do not use solvents or abrasive materials when cleaning the radiator,<br />
thus avoiding to damage the paint covering.<br />
- Do not use fired tile nor porous material humidifiers.<br />
• Optional accessories<br />
- For optional accessories intended for aluminium radiators, see page?<br />
- In the presence of hard water it is<br />
recommended to assemble a<br />
polyphosphate proportional dosing unit<br />
at the boiler cold water inlet.<br />
80<br />
98<br />
A<br />
B<br />
800<br />
radiator radiator A B<br />
code type<br />
F17165100 510 500 581,5<br />
F17166100 610 500 581,5<br />
F17167100 710 500 581,5<br />
F17168100 810 500 581,5<br />
Larghezza<br />
Singolo<br />
10 elements<br />
• Technical data<br />
Types 510 610 710 810<br />
Heating power ΔT 50°C in compliance with EN 442 W 1.220 1.410 1.590 1.730<br />
kcal/h 1.049,2 1.212,6 1.367,4 1.487,8<br />
Heating power ΔT 60°C in compliance with EN 442 W 1.545 1.788 2.026 2.201<br />
Heating power ΔT 70°C in compliance with EN 442 W 1.887 2.187 2.488 2.698<br />
Heating power per part ΔT 50°C in compliance with EN 442 W 122 141 159 173<br />
kcal/h 104,92 121,26 136,74 148,78<br />
K coefficient n 1,2962 1,3039 1,3282 1,3204<br />
Maximum operation pressure bar 10 10 10 10<br />
Water composition l 4 4,3 5 5,2<br />
Elements n 10 10 10 10<br />
Connections Ø 1” 1” 1” 1”<br />
Weight kg 13 15 18 20<br />
74
Change language