sy24inst2 - The Initiative Group

Rendamax
4 Delivery and transport
4.1 Delivery
The unit comes standard fully assembled, tested and packaged.
After delivery and removal of the protective covering, check the appliance for damage.
Check that the equipment delivered is in accordance with the order and the delivery note.
On delivery, check the data plate for the correct boiler type and gas supply pressure.
4.2 Packaging
The unit is supplied in cardboard packaging on a pallet.
For transport, consult the technical details for dimensions and weight.
4.3 Transport
xw
Remove the packaging preferably after transportation and positioning in the boiler room or
remove the panels before transporting the appliance. This is to prevent damage to the casing
panels.
Moving the appliance
A pallet truck or fork lift truck used at the front or side of the unit.
Standard door width
The dimensions of the unit are such that after removing the pallet, all types will fit through a
standard width door opening of 80 cm (remove the outside panels of type R307).
Positioning
Once the boiler has been installed, it can be adjusted horizontally using the adjusting feet.
Subsequently, the water, gas, condensate and electrical connections can be made.
w
Protection against frost
If the unit is out of use during the winter months there is a danger of freezing. Drain the water
from the installation using the filling/drainage valves.
Doc586/50CV22C 11