User Manual - AMS Neve
User Manual - AMS Neve
User Manual - AMS Neve
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SynchroNet ES/2 <strong>User</strong> Guide<br />
ES/2 Operations Reference<br />
Mode Select Menu<br />
EMUL<br />
CH-M<br />
CH-S<br />
CH-S >mode mode = EXT mode< EXT<br />
CH-M >mode MODE SELECT MENU mode< EMUL<br />
The Mode Select Menu, and the four associated soft keys may be used to change the mode of<br />
operation of the ES/2 between:<br />
CH M<br />
Chase master.<br />
CH S<br />
Chase slave.<br />
EXT<br />
External ESbus controller.<br />
EMUL<br />
Emulation of Sony and other non-ESbus serial protocols.<br />
The currently selected mode of the ES/2 is shown in the top centre of the Mode Select Menu.<br />
<br />
The ES/2 must be OFF BUS and in Normal Display before the Mode Select Menu display<br />
can be accessed.<br />
When the operating mode is changed, various setup parameters are saved into battery backed up<br />
RAM and new values restored for the mode being selected.<br />
These are :<br />
• Timeline mastership and reference<br />
• Generator mode, output selection and reference<br />
• Timecode bus mastership<br />
• Lock mode<br />
• Slew rate<br />
Appendix B shows the default settings after a Hard Reset.<br />
Issue 2 3:7
Change language