Cooper B-Line Pipe Hangers & Supports - Dixie Construction Products

More documents

Recommendations

Info

Pipe Supports, Guides, Shields & Saddles Figure B3891 - B3897 Pipe Slide Assembly Series B3891 - 10 - CL Base Style Travel Options 1 04” (101) (except B3897) Standard Slide = Blank 2 10” (254) (except B3897) W/ End Plates = EP - Pipe Size 3 2 1 /2” (63) (B3897 only) W/ B3140 Clamps = CL - Pipe Size 4 5 6 7 Material: Tee - Carbon Steel; Facing Plate - Stainless Steel Type 304; Base - Carbon Steel with teflon ® slide pads. Finish: Black paint. Service: Designed to support pipe where horizontal movement from expansion and contraction is present. Fits up to 3” insulation thickness. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 35. Operating Temperature Rating: 400°F (204°C) maximum Loading: Capable of supporting constant loads up to 2000 Psi at 70°F. B3891 B3892 B3893 B3894 B3895 B3896 B3897 Notes: B3891, B3892 and B3893 are designed for longitudinal movement only. B3894, B3895 and B3896 are designed for longitudinal and limited transverse movement. B3897 is designed for up to 5 inches (127mm) of horizontal movement in any direction, depending on the installed position. Options: Supports, Guides, Shields & Saddles End Plates B3140 Clamps All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 110
Pipe Supports, Guides, Shields & Saddles Figure B3891 - B3897 Pipe Slide Assembly Series Pipe Travel Height 'H' Length 'L' Depth 'B' Diameter 'D' Size In. mm Part No. In. mm In. mm In. mm In. mm 2 1 /2” (63.5) B3897 5 5 /16" (134.9) 9 1 /2" (241.3) 5" (127.0) 4" (101.6) 4" (127.0) B3891 4 5 /8" (117.5) 6" (152.4) 2" (50.8) N/A N/A B3892 5 1 /8" (130.2) 6" (152.4) 4" (101.6) N/A N/A B3893 5 1 /8" (130.2) 6" (152.4) 4" (101.6) N/A N/A B3894 4 5 /8" (117.5) 6" (152.4) 2" (50.8) N/A N/A B3895 5 1 /8" (130.2) 6" (152.4) 4" (101.6) N/A N/A 1" to 24" B3896 5 1 /8" (130.2) 6" (152.4) 4" (101.6) N/A N/A (25 to 600) B3891 4 5 /8" (117.5) 12" (304.8) 2" (50.8) N/A N/A B3892 5 1 /8" (130.2) 12" (304.8) 4" (101.6) N/A N/A 10" (254.0) B3893 5 1 /8" (130.2) 12" (304.8) 4" (101.6) N/A N/A B3894 4 5 /8" (117.5) 12" (304.8) 2" (50.8) N/A N/A B3895 5 1 /8" (130.2) 12" (304.8) 4" (101.6) N/A N/A B3896 5 1 /8" (130.2) 12" (304.8) 4" (101.6) N/A N/A Max Pipe Travel Width 'P' Width 'W' Recommended Load Size In. mm Part No. In. mm In. mm Lbs. kN 2 1 /2” (63.5) B3897 N/A N/A 9 1 /2" (241.3) 16000 (71.2) B3891 4" (101.6) N/A N/A 12000 (53.4) B3892 4" (101.6) 7" (177.8) 12000 (53.4) 4" (127.0) B3893 4" (101.6) 7" (177.8) 12000 (53.4) B3894 N/A N/A 6" (152.4) 12000 (53.4) B3895 6" (152.4) 10" (254.0) 24000 (106.8) 1" to 24" B3896 6" (152.4) 10" (254.0) 24000 (106.8) (25 to 600) B3891 4" (101.6) N/A N/A 12000 (53.4) B3892 4" (101.6) 7" (177.8) 12000 (53.4) 10" (254.0) B3893 4" (101.6) 7" (177.8) 12000 (53.4) B3894 N/A N/A 6" (152.4) 12000 (53.4) B3895 6" (152.4) 10" (254.0) 24000 (106.8) B3896 6" (152.4) 10" (254.0) 24000 (106.8) *Based on teflon ® of 500 psi. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. Supports, Guides, Shields & Saddles 111
Page 1 and 2:
PH-08 Pipe Hangers & Supports Pipe
Page 3 and 4:
Table of Contents Pictorial Index .
Page 5 and 6:
Pictorial Index PIPE HANGERS Pictor
Page 7 and 8:
Pictorial Index PIPE HANGERS (Conti
Page 9 and 10:
Pictorial Index PIPE SUPPORTS, GUID
Page 11 and 12:
Pictorial Index BRACKETS Pictorial
Page 13 and 14:
Pictorial Index THREADED ACCESSORIE
Page 15 and 16:
Pictorial Index DURA-BLOK (Continue
Page 17 and 18:
Strut Systems Below are some basic
Page 19 and 20:
Technical Data Dura-Copper ® and D
Page 21 and 22:
Technical Data 2. Uninsulated pipes
Page 23 and 24:
Technical Data 2. Continuous concre
Page 25 and 26:
Technical Data E. Support horizonta
Page 27 and 28:
Beam Clamps 'B' 'D' 'C' Setscrew an
Page 29 and 30:
Beam Clamps 'C' 'D' Material: Ducti
Page 31 and 32:
Beam Clamps 7/8" (22.2) Maximum Fla
Page 33 and 34:
Beam Clamps Material: Steel Standar
Page 35 and 36:
Beam Clamps Clamping Rod and Nuts I
Page 37 and 38:
Beam Clamps Material: Steel Steel S
Page 39 and 40:
Beam Clamps Beam Clamps All dimensi
Page 41 and 42:
Pipe Hangers 'A' (Rod Size) Hanger
Page 43 and 44:
Pipe Hangers 'D' 'E' 'A' (Rod Size)
Page 45 and 46:
'D' 'E' B3104CT 'A' (Rod Size) Hang
Page 47 and 48:
Pipe Hangers 'H' Maximum insulation
Page 49 and 50:
Pipe Hangers 'B' 'D' 'A' (Rod Size)
Page 51 and 52:
Pipe Hangers 'B' 'D' 'A' (Rod Size)
Page 53 and 54:
'C' 'A' (Rod Size) Hanger Rod Not I
Page 55 and 56:
Pipe Hangers Bolt and Nut Included
Page 57 and 58:
Pipe Hangers 9/16" (14.3) 2 Holes '
Page 59 and 60:
Pipe Hangers 'D' 'C' 'A' (Rod Size)
Page 61 and 62: Pipe Hangers Pipe Hangers All dimen
Page 63 and 64: Pipe Clamps Design Load Bolt Size B
Page 65 and 66: Pipe Clamps Material: Steel 'A' Bol
Page 67 and 68: 'B' 'C' 'B' 'C' 'A' Bolt Size 'B' C
Page 69 and 70: 'C' Center of pipe to center of cla
Page 71 and 72: Bolts and Nuts Included Figure B314
Page 73 and 74: Pipe Clamps Pipe Size Design Load 1
Page 75 and 76: 'E' 'F' 'A' (Rod Size) Hanger Rod N
Page 77 and 78: 'E' 'F' 'D' 'A' (Rod Size) 'C' Figu
Page 79 and 80: Steel Size 'B' 'A' 'E' 'C' 'D' Bolt
Page 81 and 82: Pipe Rollers & Roller Supports Mate
Page 83 and 84: Pipe Rollers & Roller Supports Chan
Page 87 and 88: 'F' 'A' 'D' 'E' 'C' 'B' 'C' Center
Page 89 and 90: Pipe Rollers & Roller Supports 'A'
Page 93 and 94: Pipe Supports, Guides, Shields & Sa
Page 97 and 98: 'B' Pipe Size 'C' Center of pipe to
Page 111: Pipe Supports, Guides, Shields & Sa
Page 125 and 126: Insulation Part Thickness Number 1"
Page 127 and 128: Stock Size 'L' Pipe Supports, Guide
Page 131 and 132: Concrete Inserts Material: Steel St
Page 133 and 134: Concrete Inserts Material: Malleabl
Page 135 and 136: Concrete Inserts 5/32" (4.0) Dia. N
Page 137 and 138: Concrete Inserts 2 5 /8” (66.7) 1
Page 139 and 140: Concrete Inserts Material: Steel St
Page 141 and 142: Brackets 7 /16" Dia. (11.1) 1" (25.
Page 143 and 144: Brackets Material: Steel (Stainless
Page 145 and 146: Upper Attachments 'B' Overall Heigh
Page 147 and 148: Upper Attachments For #12 Flat Head
Page 149 and 150: Upper Attachments Material: Steel S
Page 155 and 156: Threaded Accessories 'A' (Rod Size)
Page 157 and 158: Threaded Accessories Figure B3188 S
Page 159 and 160: Threaded Accessories 'F' Distance f
Page 161 and 162: 'TL' Specify 'L' 'TL' Threaded Acce
Page 163 and 164:
Threaded Accessories Material: Stee
Page 165 and 166:
Threaded Accessories 'B' 'A' Dia. M
Page 167 and 168:
'A' Specify 'C' 'A' 'T' Material: S
Page 169 and 170:
Threaded Accessories Threaded Acces
Page 171 and 172:
Vibra Trol ® Data Selection Distur
Page 173 and 174:
1 1 /2" (38.1) 'L' 'W' 13/16" (20.6
Page 175 and 176:
Vibra Trol ® Use: Designed for the
Page 177 and 178:
Vibra Trol ® OML*/OM Type - Free S
Page 179 and 180:
Vibra Trol ® HMLE*/HME Type - Hous
Page 181 and 182:
Vibra Trol ® HMLT*/HMT Type - Hous
Page 183 and 184:
Vibra Trol ® Use: RH Series Neopre
Page 185 and 186:
HSL*/HS Type - Vibration Spring Han
Page 187 and 188:
Vibra Trol ® HESL*/HES Type - Comb
Page 189 and 190:
Vibra Trol ® SHE Type - Isolation
Page 191 and 192:
Vibra Trol ® BVT Series VibraClamp
Page 193 and 194:
Vibra Trol ® B1999 Vibra Cushion
Page 195 and 196:
Dura-Blok Rooftop Supports Base Onl
Page 197 and 198:
Dura-Blok Rooftop Supports DB6 - Se
Page 199 and 200:
Dura-Blok Rooftop Supports DBM - Se
Page 201 and 202:
Dura-Blok Rooftop Supports DB__DS -
Page 203 and 204:
Dura-Blok Rooftop Supports DBR - Se
Page 205 and 206:
Dura-Blok Rooftop Supports Compatib
Page 207 and 208:
Dura Clean Washdown Supports Dura-C
Page 209 and 210:
Dura Clean Washdown Supports Dura-C
Page 211 and 212:
Features • Material: 316 Stainles
Page 213 and 214:
KwikWire Accessories Installation K
Page 215 and 216:
KwikWire Accessories • B-Line Kwi
Page 217 and 218:
KwikWire Accessories KwikWire All d
Page 219 and 220:
Miscellaneous Assemblies ASSEMBLY 7
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
ASSEMBLY 66 Miscellaneous Assemblie
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Seismic Assemblies PIPE CLAMP TRANS
Page 239 and 240:
Seismic Assemblies LONGITUDINAL BRA
Page 241 and 242:
Reference Data - Metric Conversion
Page 243 and 244:
Reference Data AWWA DUCTILE IRON PI
Page 245 and 246:
Reference Data COPPER TUBING (TYPE
Page 247 and 248:
Reference Data SCHEDULE 40 PVC PLAS
Page 249 and 250:
Reference Data AMERICAN STANDARD 'S
Page 251 and 252:
Reference Data WIDE FLANGE I-BEAMS
Page 253 and 254:
FEDERAL SPECIFICATION TO B-LINE & M
Page 255 and 256:
Reference Data B-LINE COMPLIANCES &
Page 257 and 258:
Index Part No. Page Part No. Page P
Page 260:
Other Cooper B-Line Product Lines C
show all

Cooper B-Line Pipe Hangers & Supports - Dixie Construction Products

Create successful ePaper yourself

Delete template?

Save as template?