Cooper B-Line Pipe Hangers & Supports - Dixie Construction Products

Vibra Trol ®
Use: Designed for the protection of sensitive
electronic, electrical, and mechanical equipment
from high frequency vibration and impact shock.
Features: Cup mounts accommodate multidirectional
loading, can support loads radially and
axially in both compression and tension. Effectively
isolate frequencies above 45 Hz. Metal housing is
zinc plated and furnished with either 1 /4"-20 or 3 /8"-16
tapped hole. The elastomer element is a high grade
neoprene with excellent oil and ozone resistance.
Temperature Range: -20°F to 180°F.
2 3 /8"
(60.3)
1 15 /16"
(49.2)
3"
(76.2)
2 1 /2"
(63.5)
2 3 /8"
(60.3)
3"
(76.2)
1 15 /16"
(49.2)
2 1 /2"
(63.5)
1/4"-20 Tap
CM1 Series
.196" (5.0) Dia.
3/8"-16 Tap
CM2 Series
.266" (6.7) Dia.
Ideal for wall or ceiling mounts.
Arrows indicate
vibration direction.
Vibra Trol
CM Type - Metal Housing and Neoprene Cup Mount
Part Load Range Tap Wt. Each
Number Lbs. kN Size Lbs. kg
CM1-14BNT 8 to 14 (.03-.06) 1 /4"-20 .60 (.27)
CM1-24BNT 14 to 24 (.06-.10) 1 /4"-20 .60 (.27)
CM1-38BNT 24 to 38 (.10-.17) 1 /4"-20 .60 (.27)
CM1-60BNT 38 to 60 (.17-.26) 1 /4"-20 .60 (.27)
CM2-30BNT 15 to 30 (.07-.13) 3 /8"-16 .70 (.32)
CM2-50BNT 30 to 50 (.13-.22) 3 /8"-16 .70 (.32)
CM2-80BNT 50 to 80 (.22-.35) 3 /8"-16 .70 (.32)
CM2-110BNT 80 to 110 (.35-.49) 3 /8"-16 .70 (.32)
Approximate Height
CM1 Series 1 1 /8" (28.6)
CM2 Series 1 1 /2" (38.1)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
173