Cooper B-Line Pipe Hangers & Supports - Dixie Construction Products

INTRODUCTION
Cooper B-Line ® , Inc. is a leading manufacturer
and fabricator of metal products used in the
support of pipe and equipment for industrial,
commercial, utility, and OEM installations. Cooper
B-Line is proud of the exacting standards of
research, design, engineering, and manufacturing
that go into each and every product that comprise
our pipe hanger product line. Our customers have
access to the most complete support systems
offered in the industry, including pipe hangers,
metal framing, cable tray, slotted angle, fasteners,
telecom, enclosures and anchors.
Many of Cooper B-Line's products are listed by
Underwriters' Laboratories, Inc. All Cooper B-Line
products are manufactured to meet or exceed
industry standards set for their design and
manufacture.
Cooper B-Line products are produced in four
modern plants consisting of over 1,000,000
square feet. These facilities are located in
Highland, Illinois; Troy, Illinois; Reno, Nevada,
and Sherman, Texas. Regional sales and
distribution centers are located throughout the
United States stocking standard Cooper B-Line
products for quick service and delivery.
This catalog is designed to be helpful to
engineers and contractors in the application and
selection of pipe hanger and support products for
construction and maintenance.
If a unique application requires a special product
not included in this catalog, Cooper B-Line
engineering personnel are ready to furnish design
consultation and realistic material estimates. In
addition, sales representatives with engineering
know-how are located throughout the United
States and abroad for your convenience.
Warning
All hanger products in this catalog are intended for
installation and service as illustrated or described. We are
aware that these products have been used successfully for
purposes other than for which they were designed. We also
know that on occasion, these products have failed when
used as tools for erection or for some purpose other than
intended use. We caution against misapplication which may
result in failure or accident.
Examples of this misapplication which can result in failure
include: the use of a beam clamp on a beam other than
described in the catalog; the use of concrete inserts as a
anchor for pulling pipe up to the required elevation; and the
suspension of clevis hangers, one under another, which can
result in the accumulative load greater than the pipe hanger
will support. Cooper B-Line pipe hanger products are
manufactured in accordance with industry standards. Our
customers should exercise care to use these products
properly so as to avoid an on-the-job accident. Consult the
Home Office for assistance of proper installation and use of
the products in this catalog.
SINCE
1924
MANUFACTURERS STANDARDIZATION SOCIETY
OF THE
VALVE AND FITTING INDUSTRY, INC.
Cooper B-Line
509 West Monroe Street
P.O. Box 326
Highland, Illinois 62249-0326
Phone: 800-851-7415
www.cooperbline.com