Cooper B-Line Pipe Hangers & Supports - Dixie Construction Products
Cooper B-Line Pipe Hangers & Supports - Dixie Construction Products
Cooper B-Line Pipe Hangers & Supports - Dixie Construction Products
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Dura Clean Washdown <strong>Supports</strong><br />
U-Bolts<br />
Features<br />
• Material: Steam cleaned 304<br />
Stainless Steel<br />
• Includes serrated flange hex nuts<br />
and flat washers<br />
• Designed for use with rigid/emt<br />
conduit, OD tubing and copper,<br />
schedule 40/80 and Ocal pipe sizes<br />
“C”<br />
“B”<br />
“A”<br />
3 /8”-16<br />
Cut Threads<br />
<strong>Pipe</strong> - Conduit - Tubing Sizes<br />
Part OD Sch. Rigid EMT Copper Ocal “A” “B” “C” Design Load Wt./C<br />
Number Tubing 40/80 <strong>Pipe</strong> Conduit Conduit <strong>Pipe</strong> <strong>Pipe</strong> lbs. kN lbs. kg<br />
DC-1 1 /2”, 3 /4” - - 1 /2” 1 /2” - 0.81 (20.6) 0.88 (22.2) 1.50 (38.1) 600 (2.67) 0.13 (0.06)<br />
DC-2 - 1 /2” 1 /2” 3 /4” 3 /4” 1 /2” 0.98 (25.0) 0.88 (22.2) 1.67 (42.5) 600 (2.67) 0.14 (0.07)<br />
DC-3 1” 3 /4” 3 /4” 1” 1” 3 /4” 1.23 (31.1) 1.00 (25.4) 1.91 (48.6) 600 (2.67) 0.16 (0.07)<br />
DC-4 1 1 /4” 1” 1” - 1 1 /4” 1” 1.46 (37.0) 1.00 (25.4) 2.15 (54.5) 900 (4.00) 0.19 (0.08)<br />
DC-5 1 1 /2” 1 1 /4” 1 1 /4” 1 1 /4” 1 1 /2” - 1.72 (43.7) 1.00 (25.4) 2.41 (61.2) 900 (4.00) 0.29 (0.13)<br />
DC-6 - 1 1 /2” 1 1 /2” 1 1 /2” - 1 1 /4” 1.96 (49.8) 1.00 (25.4) 2.65 (67.3) 900 (4.00) 0.22 (0.10)<br />
DC-7 2” - - 2” 2” 1 1 /2” 2.26 (57.4) 1.00 (25.4) 2.95 (74.9) 1200 (5.34) 0.25 (0.11)<br />
DC-8 2 1 /2” 2” 2” - 2 1 /2” 2” 2.69 (68.2) 1.00 (25.4) 3.38 (85.7) 1200 (5.34) 0.28 (0.13)<br />
DC-9 3” 2 1 /2” 2 1 /2” 2 1 /2” 3” 2 1 /2” 3.19 (80.9) 1.00 (25.4) 3.88 (98.4) 1200 (5.34) 0.33 (0.15)<br />
DC-10 3 1 /2” 3” 3” 3” 3 1 /2” 3” 3.69 (93.6) 1.00 (25.4) 4.38 (111.1) 1800 (8.00) 0.37 (0.17)<br />
DC-11 4” 3 1 /2” 3 1 /2” 3 1 /2” 4” 3 1 /2” 4.25 (108.0) 1.00 (25.4) 4.88 (123.8) 1800 (8.00) 0.41 (0.19)<br />
DC-12 - 4” 4” 4” - 4” 4.71 (119.5) 1.00 (25.4) 5.33 (135.4) 1800 (8.00) 0.45 (0.20)<br />
All Threaded Rod<br />
Features<br />
• Material: Steam cleaned 304 Stainless Steel<br />
• Standard Lengths: 36” (.92m) & 72” (1.83m)<br />
(other length available upon request)<br />
• 3 /8”-16 cut threads standard<br />
• Cut threads allow the customer to cut rods to<br />
length and then field cut threads where required<br />
Length<br />
3 /8”-16 Cut Thread<br />
(both ends)<br />
Dura Clean<br />
3”<br />
(76mm)<br />
Channel Length Threads Per Recommended Wt./100 pcs.<br />
Part No. Inch Load<br />
lbs. N lbs. kg<br />
3 /8” (9.5mm)<br />
3”<br />
(76mm)<br />
DCR38-36 36” (914) 16 730 (324) 186.2 (84.4)<br />
DCR38-72 72” (1829) 16 730 (324) 372.4 (168.9)<br />
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.<br />
208
Change language