Cooper B-Line Pipe Hangers & Supports - Dixie Construction Products

More documents

Recommendations

Info

Dura Clean Washdown Supports U-Bolts Features • Material: Steam cleaned 304 Stainless Steel • Includes serrated flange hex nuts and flat washers • Designed for use with rigid/emt conduit, OD tubing and copper, schedule 40/80 and Ocal pipe sizes “C” “B” “A” 3 /8”-16 Cut Threads Pipe - Conduit - Tubing Sizes Part OD Sch. Rigid EMT Copper Ocal “A” “B” “C” Design Load Wt./C Number Tubing 40/80 Pipe Conduit Conduit Pipe Pipe lbs. kN lbs. kg DC-1 1 /2”, 3 /4” - - 1 /2” 1 /2” - 0.81 (20.6) 0.88 (22.2) 1.50 (38.1) 600 (2.67) 0.13 (0.06) DC-2 - 1 /2” 1 /2” 3 /4” 3 /4” 1 /2” 0.98 (25.0) 0.88 (22.2) 1.67 (42.5) 600 (2.67) 0.14 (0.07) DC-3 1” 3 /4” 3 /4” 1” 1” 3 /4” 1.23 (31.1) 1.00 (25.4) 1.91 (48.6) 600 (2.67) 0.16 (0.07) DC-4 1 1 /4” 1” 1” - 1 1 /4” 1” 1.46 (37.0) 1.00 (25.4) 2.15 (54.5) 900 (4.00) 0.19 (0.08) DC-5 1 1 /2” 1 1 /4” 1 1 /4” 1 1 /4” 1 1 /2” - 1.72 (43.7) 1.00 (25.4) 2.41 (61.2) 900 (4.00) 0.29 (0.13) DC-6 - 1 1 /2” 1 1 /2” 1 1 /2” - 1 1 /4” 1.96 (49.8) 1.00 (25.4) 2.65 (67.3) 900 (4.00) 0.22 (0.10) DC-7 2” - - 2” 2” 1 1 /2” 2.26 (57.4) 1.00 (25.4) 2.95 (74.9) 1200 (5.34) 0.25 (0.11) DC-8 2 1 /2” 2” 2” - 2 1 /2” 2” 2.69 (68.2) 1.00 (25.4) 3.38 (85.7) 1200 (5.34) 0.28 (0.13) DC-9 3” 2 1 /2” 2 1 /2” 2 1 /2” 3” 2 1 /2” 3.19 (80.9) 1.00 (25.4) 3.88 (98.4) 1200 (5.34) 0.33 (0.15) DC-10 3 1 /2” 3” 3” 3” 3 1 /2” 3” 3.69 (93.6) 1.00 (25.4) 4.38 (111.1) 1800 (8.00) 0.37 (0.17) DC-11 4” 3 1 /2” 3 1 /2” 3 1 /2” 4” 3 1 /2” 4.25 (108.0) 1.00 (25.4) 4.88 (123.8) 1800 (8.00) 0.41 (0.19) DC-12 - 4” 4” 4” - 4” 4.71 (119.5) 1.00 (25.4) 5.33 (135.4) 1800 (8.00) 0.45 (0.20) All Threaded Rod Features • Material: Steam cleaned 304 Stainless Steel • Standard Lengths: 36” (.92m) & 72” (1.83m) (other length available upon request) • 3 /8”-16 cut threads standard • Cut threads allow the customer to cut rods to length and then field cut threads where required Length 3 /8”-16 Cut Thread (both ends) Dura Clean 3” (76mm) Channel Length Threads Per Recommended Wt./100 pcs. Part No. Inch Load lbs. N lbs. kg 3 /8” (9.5mm) 3” (76mm) DCR38-36 36” (914) 16 730 (324) 186.2 (84.4) DCR38-72 72” (1829) 16 730 (324) 372.4 (168.9) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 208
Features • Material: 316 Stainless Steel • Flat washer for 3 /8” threaded rod • Serrated hex nut for 3 /8”-16 threaded rod • Weight Per 100: Flat Washers 1.7 lbs (0.77kg) Serrated Hex Nuts 3.0 lbs (1.36kg) Dura Clean Washdown Supports Hardware Channel 3/8FWSS6 SFHN38SS6 Description 3 /8” Flat Washer 3 /8”-16 Serrated Hex Nut Spacers Features • Material: 304 Stainless Steel • Spacers are used to provide 1” (25mm) of separation from wall to channel, eliminating any area that may harbor bacteria. • Weight Per 100: 16.9 lbs (7.6kg) 1” (25mm) 1.000” OD (25mm) .440” ID (11mm) Channel DCSPSS4 Description Spacers Other stainless steel strut products are available. See Strut Systems Catalog or Consult Cooper B-Line Customer Service for additional information. Dura Clean All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 209
Page 1 and 2:
PH-08 Pipe Hangers & Supports Pipe
Page 3 and 4:
Table of Contents Pictorial Index .
Page 5 and 6:
Pictorial Index PIPE HANGERS Pictor
Page 7 and 8:
Pictorial Index PIPE HANGERS (Conti
Page 9 and 10:
Pictorial Index PIPE SUPPORTS, GUID
Page 11 and 12:
Pictorial Index BRACKETS Pictorial
Page 13 and 14:
Pictorial Index THREADED ACCESSORIE
Page 15 and 16:
Pictorial Index DURA-BLOK (Continue
Page 17 and 18:
Strut Systems Below are some basic
Page 19 and 20:
Technical Data Dura-Copper ® and D
Page 21 and 22:
Technical Data 2. Uninsulated pipes
Page 23 and 24:
Technical Data 2. Continuous concre
Page 25 and 26:
Technical Data E. Support horizonta
Page 27 and 28:
Beam Clamps 'B' 'D' 'C' Setscrew an
Page 29 and 30:
Beam Clamps 'C' 'D' Material: Ducti
Page 31 and 32:
Beam Clamps 7/8" (22.2) Maximum Fla
Page 33 and 34:
Beam Clamps Material: Steel Standar
Page 35 and 36:
Beam Clamps Clamping Rod and Nuts I
Page 37 and 38:
Beam Clamps Material: Steel Steel S
Page 39 and 40:
Beam Clamps Beam Clamps All dimensi
Page 41 and 42:
Pipe Hangers 'A' (Rod Size) Hanger
Page 43 and 44:
Pipe Hangers 'D' 'E' 'A' (Rod Size)
Page 45 and 46:
'D' 'E' B3104CT 'A' (Rod Size) Hang
Page 47 and 48:
Pipe Hangers 'H' Maximum insulation
Page 49 and 50:
Pipe Hangers 'B' 'D' 'A' (Rod Size)
Page 51 and 52:
Pipe Hangers 'B' 'D' 'A' (Rod Size)
Page 53 and 54:
'C' 'A' (Rod Size) Hanger Rod Not I
Page 55 and 56:
Pipe Hangers Bolt and Nut Included
Page 57 and 58:
Pipe Hangers 9/16" (14.3) 2 Holes '
Page 59 and 60:
Pipe Hangers 'D' 'C' 'A' (Rod Size)
Page 61 and 62:
Pipe Hangers Pipe Hangers All dimen
Page 63 and 64:
Pipe Clamps Design Load Bolt Size B
Page 65 and 66:
Pipe Clamps Material: Steel 'A' Bol
Page 67 and 68:
'B' 'C' 'B' 'C' 'A' Bolt Size 'B' C
Page 69 and 70:
'C' Center of pipe to center of cla
Page 71 and 72:
Bolts and Nuts Included Figure B314
Page 73 and 74:
Pipe Clamps Pipe Size Design Load 1
Page 75 and 76:
'E' 'F' 'A' (Rod Size) Hanger Rod N
Page 77 and 78:
'E' 'F' 'D' 'A' (Rod Size) 'C' Figu
Page 79 and 80:
Steel Size 'B' 'A' 'E' 'C' 'D' Bolt
Page 81 and 82:
Pipe Rollers & Roller Supports Mate
Page 83 and 84:
Pipe Rollers & Roller Supports Chan
Page 85 and 86:
Page 87 and 88:
'F' 'A' 'D' 'E' 'C' 'B' 'C' Center
Page 89 and 90:
Pipe Rollers & Roller Supports 'A'
Page 91 and 92:
Page 93 and 94:
Pipe Supports, Guides, Shields & Sa
Page 95 and 96:
Page 97 and 98:
'B' Pipe Size 'C' Center of pipe to
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Insulation Part Thickness Number 1"
Page 127 and 128:
Stock Size 'L' Pipe Supports, Guide
Page 129 and 130:
Page 131 and 132:
Concrete Inserts Material: Steel St
Page 133 and 134:
Concrete Inserts Material: Malleabl
Page 135 and 136:
Concrete Inserts 5/32" (4.0) Dia. N
Page 137 and 138:
Concrete Inserts 2 5 /8” (66.7) 1
Page 139 and 140:
Concrete Inserts Material: Steel St
Page 141 and 142:
Brackets 7 /16" Dia. (11.1) 1" (25.
Page 143 and 144:
Brackets Material: Steel (Stainless
Page 145 and 146:
Upper Attachments 'B' Overall Heigh
Page 147 and 148:
Upper Attachments For #12 Flat Head
Page 149 and 150:
Upper Attachments Material: Steel S
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Threaded Accessories 'A' (Rod Size)
Page 157 and 158:
Threaded Accessories Figure B3188 S
Page 159 and 160: Threaded Accessories 'F' Distance f
Page 161 and 162: 'TL' Specify 'L' 'TL' Threaded Acce
Page 163 and 164: Threaded Accessories Material: Stee
Page 165 and 166: Threaded Accessories 'B' 'A' Dia. M
Page 167 and 168: 'A' Specify 'C' 'A' 'T' Material: S
Page 169 and 170: Threaded Accessories Threaded Acces
Page 171 and 172: Vibra Trol ® Data Selection Distur
Page 173 and 174: 1 1 /2" (38.1) 'L' 'W' 13/16" (20.6
Page 175 and 176: Vibra Trol ® Use: Designed for the
Page 177 and 178: Vibra Trol ® OML*/OM Type - Free S
Page 179 and 180: Vibra Trol ® HMLE*/HME Type - Hous
Page 181 and 182: Vibra Trol ® HMLT*/HMT Type - Hous
Page 183 and 184: Vibra Trol ® Use: RH Series Neopre
Page 185 and 186: HSL*/HS Type - Vibration Spring Han
Page 187 and 188: Vibra Trol ® HESL*/HES Type - Comb
Page 189 and 190: Vibra Trol ® SHE Type - Isolation
Page 191 and 192: Vibra Trol ® BVT Series VibraClamp
Page 193 and 194: Vibra Trol ® B1999 Vibra Cushion
Page 195 and 196: Dura-Blok Rooftop Supports Base Onl
Page 197 and 198: Dura-Blok Rooftop Supports DB6 - Se
Page 199 and 200: Dura-Blok Rooftop Supports DBM - Se
Page 201 and 202: Dura-Blok Rooftop Supports DB__DS -
Page 203 and 204: Dura-Blok Rooftop Supports DBR - Se
Page 205 and 206: Dura-Blok Rooftop Supports Compatib
Page 207 and 208: Dura Clean Washdown Supports Dura-C
Page 209: Dura Clean Washdown Supports Dura-C
Page 213 and 214: KwikWire Accessories Installation K
Page 215 and 216: KwikWire Accessories • B-Line Kwi
Page 217 and 218: KwikWire Accessories KwikWire All d
Page 219 and 220: Miscellaneous Assemblies ASSEMBLY 7
Page 229 and 230: ASSEMBLY 66 Miscellaneous Assemblie
Page 237 and 238: Seismic Assemblies PIPE CLAMP TRANS
Page 239 and 240: Seismic Assemblies LONGITUDINAL BRA
Page 241 and 242: Reference Data - Metric Conversion
Page 243 and 244: Reference Data AWWA DUCTILE IRON PI
Page 245 and 246: Reference Data COPPER TUBING (TYPE
Page 247 and 248: Reference Data SCHEDULE 40 PVC PLAS
Page 249 and 250: Reference Data AMERICAN STANDARD 'S
Page 251 and 252: Reference Data WIDE FLANGE I-BEAMS
Page 253 and 254: FEDERAL SPECIFICATION TO B-LINE & M
Page 255 and 256: Reference Data B-LINE COMPLIANCES &
Page 257 and 258: Index Part No. Page Part No. Page P
Page 260:
Other Cooper B-Line Product Lines C
show all

Cooper B-Line Pipe Hangers & Supports - Dixie Construction Products

Create successful ePaper yourself

Delete template?

Save as template?