Cooper B-Line Pipe Hangers & Supports - Dixie Construction Products

Bolts and Nuts Included
Figure B3148 Offset Pipe Clamp
'C'
'A'
Design Load
Bolt Size
'B'
'H'
2 Holes
Material: Steel (Stainless steel available)
Standard Finish: Plain or Electro-Plated
Service: Designed for supporting vertical or
horizontal pipe runs at a fixed distance from a wall
or structure.
Ordering: Specify part number and finish.
Note: Ductile and cast iron sizes are available.
Nominal Bolt Size Design Load Wt./C
Part No. Pipe Size 'A' 'B' 'C' 'H' Lbs. kN Lbs. kg
B3148- 1 /2 1 /2" (15) 2 1 /2" (63.5) 3 /8"-16 x 1 1 /2" 6" (152.4) 7 /16" (11.1) 190 (.84) 106 (48.1)
B3148- 3 /4 3 /4" (20) 2 1 /2" (63.5) 3 /8"-16 x 1 1 /2" 7 5 /16" (185.7) 7 /16" (11.1) 190 (.84) 112 (50.8)
B3148-1 1" (25) 2 5 /8" (66.7) 3 /8"-16 x 1 1 /2" 7 9 /16" (192.1) 7 /16" (11.1) 190 (.84) 123 (55.8)
B3148-1 1 /4 1 1 /4" (32) 2 13 /16" (71.4) 3 /8"-16 x 1 1 /2" 7 7 /8" (200.0) 7 /16" (11.1) 190 (.84) 133 (60.3)
B3148-1 1 /2 1 1 /2" (40) 2 15 /16" (74.6) 3 /8"-16 x 1 1 /2" 8 1 /4" (209.5) 7 /16" (11.1) 190 (.84) 140 (63.5)
B3148-2 2" (50) 3 3 /16" (81.0) 3 /8"-16 x 1 3 /4" 9 1 /8" (231.8) 7 /16" (11.1) 420 (1.87) 195 (88.4)
B3148-2 1 /2 2 1 /2" (65) 3 7 /16" (87.3) 3 /8"-16 x 1 3 /4" 10 1 /2" (266.7) 7 /16" (11.1) 420 (1.87) 226 (102.5)
B3148-3 3" (80) 3 3 /4" (95.2) 3 /8"-16 x 1 3 /4" 11 1 /8" (282.6) 7 /16" (11.1) 420 (1.87) 244 (110.7)
B3148-4 4" (100) 4 1 /4" (107.9) 1 /2"-13 x 2" 12 1 /2" (317.5) 9 /16" (14.3) 610 (2.71) 358 (162.4)
B3148-5 5" (125) 4 3 /4" (120.6) 1 /2"-13 x 2 1 /4" 13 3 /4" (349.2) 9 /16" (14.3) 610 (2.71) 415 (188.2)
B3148-6 6" (150) 5 5 /16" (134.9) 1 /2"-13 x 2 1 /4" 16 1 /2" (419.1) 9 /16" (14.3) 870 (3.87) 685 (310.7)
B3148-8 8" (200) 6 5 /16" (160.3) 1 /2"-13 x 2 1 /2" 18 5 /8" (473.1) 9 /16" (14.3) 870 (3.87) 815 (369.7)
B3148-10 10" (250) 7 3 /4" (196.8) 3 /4"-10 x 3" 23" (584.2) 13 /16" (20.6) 870 (3.87) 2142 (971.6)
B3148-12 12" (300) 8 3 /4" (222.2) 3 /4"-10 x 3" 25" (635.0) 13 /16" (20.6) 870 (3.87) 2337 (1060.0)
Pipe Clamps
Material: Steel (Stainless steel available)
Standard Finish: Plain or Electro-Plated
Bolts and Nuts Included
'C'
Figure B3149 Marine Hanger
'A'
Bolt Size
'B'
Service: Designed for suspending or supporting
pipe runs where exact distance from structure to
pipe cannot be determined until installation. Field
modify legs to suit conditions.
Ordering: Specify part number and finish.
Nominal Bolt Size Wt./C
Part No. Pipe Size 'A' 'B' 'C' Lbs. kg
B3149- 3 /4 3 /4" (20) 12" (304.8) 3 /8"-16 x 1 1 /2" 4 7 /16" (112.7) 182 (82.5)
B3149-1 1" (25) 12" (304.8) 3 /8"-16 x 1 1 /2" 4 11 /16" (119.1) 230 (104.3)
B3149-1 1 /4 1 1 /4" (32) 12" (304.8) 3 /8"-16 x 1 1 /2" 5" (127.0) 239 (108.4)
B3149-1 1 /2 1 1 /2" (40) 12" (304.8) 3 /8"-16 x 1 1 /2" 5 1 /4" (133.3) 244 (110.7)
B3149-2 2" (50) 12" (304.8) 1 /2"-13 x 1 3 /4" 6" (152.4) 319 (144.7)
B3149-2 1 /2 2 1 /2" (65) 12" (304.8) 1 /2"-13 x 2" 7 1 /4" (184.1) 434 (196.8)
B3149-3 3" (80) 12" (304.8) 1 /2"-13 x 2" 7 7 /8" (200.0) 454 (205.9)
B3149-4 4" (100) 12" (304.8) 1 /2"-13 x 2" 9 1 /4" (234.9) 493 (223.6)
B3149-5 5" (125) 12" (304.8) 1 /2"-13 x 2" 10 1 /2" (266.7) 530 (240.4)
B3149-6 6" (150) 12" (304.8) 5 /8"-11 x 2 1 /2" 12 1 /2" (317.5) 1142 (518.0)
B3149-8 8" (200) 12" (304.8) 5 /8"-11 x 2 1 /2" 14 5 /8" (371.5) 1273 (577.4)
Note: Ductile and cast iron sizes are available.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Clamps
69