Cooper B-Line Pipe Hangers & Supports - Dixie Construction Products

Pipe Rollers & Roller Supports
'A'
(Rod Size)
Hanger Rod
Not Included
'C'
'D'
Material: Steel
Standard Finish: Plain or Electro-Plated
Service: Designed for use with B3114 as a
cushion spring for a piping system where vertical
movement does not exceed 1 1 /4" (31.7).
Ordering: Specify part number, size and finish.
Approvals: Complies with Federal Specification
WW-H-171E & A-A-1192A Type 50 and
Manufacturers' Standardization Society SP-69 &
SP-58 Type 49.
Includes:
2 Springs
4 Cup Washers
Figure B3264 Spring Cushion Hanger
Maximum Load at
Spring Deflection 1" (25.4)
Rod Size Free Height Per Spring Deflection-2 Springs Wt./CPR
Part No. 'A' 'C' 'D' Lbs./In. kg/mm Lbs. kN Lbs. kg
B3264-1 3 /8"-16 3" (76.2) 1 11 /16" (42.8) 30 (0.5) 78 (.34) 100 (45.3)
B3264-5 3 /4"-10 4 5 /8" (117.5) 2 5 /16" (58.7) 707 (12.6) 1500 (6.67) 400 (181.4)
B3264-6 1"-8 4 7 /8" (123.8) 3 1 /4" (82.5) 1600 (28.6) 3200 (14.23) 700 (317.5)
Pipe Rollers &
Pipe Supports
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
87