Cooper B-Line Pipe Hangers & Supports - Dixie Construction Products

Pipe Rollers & Roller Supports
Material: Cast Iron
Standard Finish: Plain or Electro-Plated
'L'
'D'
'A'
Axle Dia
Service: Designed for supporting pipe runs with longitudinal
movement. Use with steel rod axle.
Ordering: Specify part number and finish.
Notes: If using D.I. pipe refer to page 237 for sizing.
Non-metallic roller with stainless steel axle sleeve are available for
most sizes (BFP3117R-Pipe Size). Contact B-Line Engineering for
more information.
Figure B3117R Short Pattern
Pipe Roller Only
Nominal Axle Dia. Wt./C
Part No. Pipe Size 'A' 'D' 'L' Lbs. kg
B3117R-2 to 3 1 /2 2" to 3 1 /2" (50 to 90) 1 /2" (12.7) 1 7 /8" (47.6) 2 3 /4" (69.8) 70 (31.7)
B3117R-4 to 6 4" to 6" (100 to 150) 1 /2" (12.7) 2 1 /16" (52.4) 3 3 /4" (95.2) 114 (51.7)
B3117R-8 to 10 8", 10" (200 to 250) 3 /4" (19.0) 3 1 /4" (82.5) 6" (152.4) 329 (149.2)
B3117R-12 to 14 12", 14" (300 to 350) 7 /8" (22.2) 4" (101.6) 8" (203.2) 600 (272.1)
B3117R-16 to 20 16" to 20" (400 to 500) 1 1 /8" (28.6) 4 1 /2" (114.3) 9" (228.6) 781 (354.2)
B3117R-24 24" (600) 1 1 /4" (31.7) 4 7 /16" (112.7) 10" (254.0) 842 (381.9)
B3117R-30 30" (750) 1 3 /4" (44.4) 5 1 /2" (139.7) 12 1 /2" (317.5) 1385 (628.2)
B3117R-36 to 42 36" to 42" (900 to 1050) 2" (50.8) 6" (152.4) 14 7 /8" (377.8) 1585 (718.9)
Pipe Rollers &
Pipe Supports
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
89