Download - TDK-Lambda

Model Z 10-75 20-40 36-24 60-14 100-8
Programming and readback (RS232/485, USB, Optional: IEEE; LAN)
Vout programming accuracy
Iout programming accuracy (*13)
Vout programming resolution
Iout programming resolution
Vout readback accuracy
Iout readback accuracy (*13)
Vout readback resolution
Iout readback resolution
0.05 % of rated output voltage
0.1 % of rated output current
0.012 % of full scale
0.012 % of full scale
0.05 % of rated output voltage
0.1 % of rated output current
0.012 % of full scale
0.012 % of full scale
Input Characteristics
Input voltage/freq. (*3)
85~265 V AC continuous, 47~63 Hz, Single-Phase
Maximum Input current 100/200 V AC (*18) 9.25/4.50 9.65/4.70 10.30/5.02 10.00/4.90 9.5/4.65
Power Factor (Typ)
0.99 at 100/200 V AC, 100 % load
Efficiency (Typ) 100/200 V AC (*4) (*18) [%] 80/82 82/84 84/85 83/85 84/86
Inrush current (*5)
Less than 25 A
Environmental Conditions
Operating temperature
0~50 °C, 100 % load.
Storage temperature -20~85 °C
Operating humidity [%] 20~90 % RH (no condensation).
Storage humidity [%] 10~95 % RH (no condensation).
Altitude Maximum 3000 m. Derate ambient temp above 2000 m.
Operating: Maximum ambient temperature, from 2000 m up to 3000 m
Ambient temperature 40 °C.
Safety/EMC
Applicable standards: Safety UL61010-1, EN61010-1, IEC61010-1. Design to meet UL60950-1, EN60950-1
EMC
IEC61326-1 (Built to meet EN55022/EN55024)
Withstand voltage Safety USB, LAN/IEEE/ISOLATED ANALOG: 4242 V DC / 1 min; Input-Ground:
2828 V DC / 1 min.
Output & J1, J2, J3, J4, USB, LAN/IEEE/ISOLATED ANALOG-Ground:
1000 V DC / 1 min.
60 V, 100 V models: Input-Output & J1, J2: 4242 V DC / 1 min; Input-J3, J4,
USB, LAN/IEEE/ISOLATED Analog: 4242 V DC / 1 min; Input-Ground: 2828
V DC / 1 min.
Output & J1, J2 - J3, J4, USB, LAN/IEEE/ISOLATED ANALOG:1910 V DC /
1 min; Output & J1, J2-Ground: 1380 V DC / 1 min.
J3, J4, USB/LAN/IEEE/ISOLATED ANALOG - Ground: 1000 V DC / 1 min;
Insulation resistance
More than 100 MΩ at 25 °C, 70 % RH.
Conducted emission
EN55022B, FCC part 15-B, VCCI-B
Radiated emission
EN55022B, FCC part 15-B, VCCI-B
Mechanical
Cooling
Forced air cooling by internal fan.
Weight Standard [kg] Less than 2.5 kg
Wide Body
Less than 3.0 kg. Wide body with Isolated analog or Binding post or IEEE.
Dimensions
(W x H x D)
Standard [mm] H: 83, W: 70, D: 350 (excluding bus bars, handles…).
(Refer to Outline drawing).
Wide Body
H: 83, W: 105, D: 350 (excluding bus bars, handles…).
(Refer to Outline drawing).
Shock
According to: IEC60068-2-64
Less than 20 G, half sine, 11 ms. Unit is unpacked. According to:
IEC600068-2-27
*12: For 10 V model the ripple is measured at 2 V to rated output voltage and rated out
put current. For other models, the ripple is measured at 10~100 % of rated output
voltage and rated output current.
*13: The Constant Current programming, readback and monitoring accuracy do not
include the warm-up and Load regulation thermal drift.
*14: Measured with JEITA RC-9131A (1:1) probe.
20
*15: For cases where the time interval between each down programming is longer than
Td (time delay).
*16: For cases where the time interval between each down programming is shorter than
Td (time delay).
*17: Td typical (±20 %) Minimum time between consecutive down programming cycles.
*18: PS with isolated analog option decreases efficiency by 0.5 % and increases input
current by 0.5 %