Download - TDK-Lambda

30-170 40-125 60-85 80-65 100-50 150-34 200-25 300-17 400-13 500-10 600-8.5
30 40 60 80 100 150 200 300 400 500 600
170 125 85 65 50 34 25 17 13 10 8.5
5100 5000 5100 5200 5000 5100 5000 5100 5200 500 5100
85 62.5 42.5 32.5 25 17 12.5 8.5 6.5 5 4.25
170 125 58 65 50 34 25 17 13 10 8.5
460 300 150 120 100 90 60 30 25 20 15
30 minutes following load change.
30 minutes warm-up.
30 minutes warm-up. Constant line, load & temperature.
over 30 minutes following power On. 20~600 V model: Less than ±0.25 % of rated output current over 30 minutes following power On.
3 4 6 8 10 15 20 30 40 50 60
9.5 11 14 17.7 20 27.5 35 50 65 80 95
75 75 75 100 100 120 220 300 350 400 500
10 10 10 15 15 25 45 60 80 100 120
5 5 5 5 5 5 5 5 5 5 5
30 minutes warm-up.
30 minutes warm-up. Constant line, load & temperature.
over 30 minutes following power On.
30 50 65 80 100
80 100 135 170 200
800 900 1000 1200 1500 2000 2500 3000
rated output for a load change 10 – 90 % of rated output current. Output set-point: 10 – 100 %, local sense.
2 ms for models above 100 V.
*8: For load voltage change, equal to the unit voltage rating, constant
input voltage.
*9: For 8 V~16 V models the ripple is measured from 2 V to rated output
voltage and rated output current. For other models, the ripple is measured
at 10~100 % of rated output voltage and rated output current.
Sequel }
71