Download - TDK-Lambda

Specifications Genesys GEN 2400 W
Model GEN 8-300 10-240 16-150
Rated output voltage (*1) [V] 8 10 16
Rated output current (*2) [A] 300 240 150
Rated output power [W] 2400 2400 2400
Efficiency (*3) [%] 84 84 86
Constant Current Mode
Max. line regulation (0.01 % of lo + 2 mA) (*4) [mA] 32 26 17
Max. load regulation (0.02 % of lo + 5 mA) (*6) [mA] 65 53 35
Ripple RMS 5 Hz~1 MHz (*10) [mA] 1200 960 600
Temperature coefficient [ppm/°C] 100 ppm/°C from rated output voltage, following
Constant Voltage Mode
Max. line regulation (0.01 % of Vo + 2 mV) (*4) [mV] 2.8 3 3.6
Max. load regulation (0.015 % of Vo + 5 mV) (*5) [mV] 6.2 6.5 7.4
Ripple and noise p-p 20 MHz (*9) [mV] 60 60 60
Ripple RMS 5 Hz~1 MHz [mV] 8 8 8
Remote sense compensation/line [V] 2 2 2
Temperature coefficient [ppm/°C] 100 ppm/°C of rated output voltage, following 30
Up-prog. response time, 0~Vo Rated (*7) [ms] 15
Down-prog. response time full-load (*7) [ms] 10
Down-prog. response time no-load (*8) [ms] 500
Transient response time [ms] Time for output voltage to recover within 0.5 %
Less than 1 ms for models up to and
Protective Functions
OCP
0~105 % Constant Current
OCP Fold-back
Output shut-down when power supply change
OVP type
Inverter shut-down, manual reset by AC input
OVP trip point [V] 0.5~10 0.5~12 1~19
Over Temperature Protection
User-selectable, latched or non-latched
*1: Minimum voltage is guaranteed to maximum 0.2 % of rated output voltage.
*2: Minimum current is guaranteed to maximum 0.4 % of rated output current.
*3: 3-Phase 208 V models: At 208 V AC input voltage. With rated output power.
*4: 3-Phase 208 V models: 170~265 V AC, constant load.
*5: From No-load to Full-load, constant input voltage.
Maximum drop in Remote Sense.
*6: For load voltage change, equal to the unit voltage rating,
constant input voltage.
50