Download - TDK-Lambda

Specifications Genesys GEN 3.3 kW
Model GEN 8-400 10-330 15-220
Rated output voltage (*1) [V] 8 10 15
Rated output current (*2) [A] 400 330 220
Rated output power [W] 3200 3300 3300
Constant Current Mode
Max. line regulation (0.01 % of rated lo + 2 mA) (*3) [mA] 42 35 24
Max. load regulation (0.02 % of rated lo + 5 mA) (*8) [mA] 85 71 49
Ripple RMS 5 Hz~1 MHz (*9) [mA] 1300 1200 880
Load regulation thermal drift
Less than 0.1 % of rated output current
Temperature coefficient [ppm/°C] 100 ppm/°C from rated output current,
Temperature stability
0.05 % of rated Iout over 8 hrs interval
Warm-up drift
8~20 V model: Less than ±0.5 % rated
30~600 V model: Less than ±0.25 % of
Constant Voltage Mode
Max. line regulation (0.01 % of rated Vo + 2 mV) (*3) [mV] 2.8 3 3.5
Max. load regulation (0.015 % of rated Vo + 5 mV) (*4) [mV] 6.2 6.5 7.25
Ripple and noise p-p 20 MHz (*5) [mV] 60 60 60
Ripple RMS 5 Hz~1 MHz [mV] 8 8 8
Remote sense compensation/wire [V] 2 2 2
Temperature coefficient [ppm/°C] 100 ppm/°C of rated output voltage,
Temperature stability
0.05 % of rated Vout over 8 hrs interval
Warm-up drift
Less than 0.05 % of rated output voltage
Up-prog. response time, 0~Vo Rated (*6)
[ms]
Down-prog. response time Full-load (*6) [ms] 20 100
No-load (*7) [ms] 500 600 700
Transient response time [ms] Time for output voltage to recover within
Output set-point: 10 – 100 %, local sense.
Protective Functions
OCP
0~105 % Constant Current
OCP Fold-back
Output shut-down when power supply
OVP type
Inverter shut-down, manual reset by AC
OVP trip point [V] 0.5~10 0.5~12 1~18
Output under voltage limit
Preset by front panel or communication
Over Temperature Protection
User-selectable, latched or non-latched
*1: Minimum voltage is guaranteed to maximum 0.2 % of rated output voltage.
*2: Minimum current is guaranteed to maximum 0.4 % of rated output current.
*3: Single-Phase and 3-Phase 208 V models: 170~265 V AC, constant load.
3-Phase 400 V models: 342~460 V AC, constant load.
*4: From No-Load to Full-Load, constant input voltage. Maximum drop in Remote
Sense.
*5: For 8 V~300 V models: Measured with JEITA RC-9131A (1:1) probe.
For 600 V model: Measured with 10:1 probe.
*6: From 10 % to 90 % or 90 % to 10 % of Rated Output Voltage, with rated,
resistive load.
*7: From 90 % to 10 % of Rated Output Voltage.
60