HP LaserJet P2015 Printer Software Technical Reference - ENWW

If you are using IP Printing, carry out the following steps:
a. Print out the printer configuration pages. On the printer, press and hold in the green button
for eight seconds, or until you see the LEDs above the button start to blink. The printer prints
out the configuration pages.
b. On the first configuration page, under Product Settings, find the IP Address. Type this
address into the Printer's Address field.
c. Select the Printer Model and select HP LaserJet P2015 in the Model Name list.
6. Click Add. The HP LaserJet P2015 printer appears in the Printer List.
7. Select the HP LaserJet P2015 printer, go to the Printers menu, and choose Show Info.
8. Select Installable Options from the top pull-down menu.
9. In the Collation in Printer drop-down menu, select one of the following options, depending on the
device configuration:
● Yes – Total RAM > 96 MB or Hard Disk
● No – Total RAM < 96 MB and No Hard Disk
10. If the device has the optional 250-sheet tray 3, select Tray 3.
11. If the device has a duplex unit (a standard feature on the HP LaserJet P2015dn and the
HP LaserJet P2015x models), select the Duplex Unit check box.
12. Click Apply Changes, and then close the Printer List dialog.
Troubleshooting the printer setup
If the printer does not appear in the printer list after an installation:
218 Chapter 5 Macintosh ENWW