Owner's Manual for the vehicle. With a quick reference ... - E38.org
Owner's Manual for the vehicle. With a quick reference ... - E38.org
Owner's Manual for the vehicle. With a quick reference ... - E38.org
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Lamps and bulbs<br />
165n<br />
Side turn signals<br />
5 watt bulb<br />
1 Use a screwdriver to pry out <strong>the</strong> lamp<br />
at <strong>the</strong> rear edge<br />
2 Apply gentle pressure to <strong>the</strong> bulb<br />
while turning it to <strong>the</strong> left to remove.<br />
380de100<br />
Turn signals/Parking lamps<br />
(side marker lamps), front<br />
Dual-filament bulb, 21 watt<br />
1 Remove <strong>the</strong> assembly cover<br />
2 Insert a Philips-head screwdriver<br />
(arrow) all <strong>the</strong> way in and loosen <strong>the</strong><br />
screw (about four turns)<br />
3 Remove <strong>the</strong> light assembly toward<br />
<strong>the</strong> front<br />
4 Release and remove <strong>the</strong> bulb holder<br />
5 Press gently on <strong>the</strong> bulb, turn it to <strong>the</strong><br />
left and remove<br />
6 When you have replaced <strong>the</strong> bulb,<br />
plug <strong>the</strong> light into <strong>the</strong> reliefs on <strong>the</strong><br />
headlamp with <strong>the</strong> tabs. Push <strong>the</strong> assembly<br />
into place and tighten <strong>the</strong><br />
screw<br />
7 Secure <strong>the</strong> assembly cover.<br />
380de101<br />
Front fog lamps<br />
H3 bulb, 55 watt<br />
1 Use a screwdriver to release <strong>the</strong> fog<br />
lamp retainer (arrow)<br />
2 Pull <strong>the</strong> fog lamp out toward <strong>the</strong> front<br />
3 Release and remove <strong>the</strong> cover on <strong>the</strong><br />
rear of <strong>the</strong> lamp assembly<br />
4 Remove <strong>the</strong> plug<br />
5 Detach <strong>the</strong> wire clamp<br />
6 Replace <strong>the</strong> bulb<br />
7 After replacing <strong>the</strong> bulb, guide <strong>the</strong><br />
lamp assembly back into position.<br />
Continue pressing until you hear <strong>the</strong><br />
detent snap into place.<br />
Index Data Technology Repairs Car care Controls Overview