Owner's Manual for the vehicle. With a quick reference ... - E38.org

62nAutomatic transmission
380us045
Selector lever positions
P R N D 4 3 2
Shift programs
Lever positions:
> A (Adaptive/Economy)
> M (Manual)
Selector lever in position 4:
> S (Sport program)
For an explanation of the programs, refer
to the next page.
Starting engine
The engine can only be started in positions
"Park" or "Neutral."
380us046
Changing the selector lever
position
A detent prevents inadvertent shifts into
some selector lever positions. To release
the shift-lock mechanism, press
the button on the front side of the selector
handle (arrow).
While the vehicle is stationary and
before shifting out of "Park" or
"Neutral," depress the footbrake in order
to disengage the selector lever's
lock mechanism (shift-lock).
Hold the footbrake down until starting
off. The vehicle will otherwise "creep"
when a drive position is engaged.<
Before exiting the vehicle when
the engine is running, place the
selector lever in the "Park" or "Neutral"
position and apply the parking brake. If
you do not, the vehicle can move.
Do not leave the car unattended with
the engine running.
An unattended vehicle with a running
engine represents a potential safety
hazard.<
P - Park
Select "Park" only when the vehicle is
stationary. The transmission locks to
prevent the rear wheels from turning.
R - Reverse
Select "Reverse" only when the vehicle
is stationary.
N - Neutral
Select "Neutral" only if your journey is
interrupted for a longer period.
D - Drive
(automatic shift program)
This position is designed for driving under
all normal operating conditions. All
forward gears are available; the Adaptive
Transmission Control (ATC) is fully
operational.