COMSOL Multiphysics™

meshplot
TABLE 1-11: VALID PROPERTY/VALUE PAIRS
PROPERTY 1D 2D 3D VALUE DEFAULT DESCRIPTION
nodemarker ♦ ♦ ♦ marker . Mesh vertex (node)
marker
nodemode m m m on | off See below Show mesh vertices
(node points)
parent ♦ ♦ ♦ axes handle Handle to axes
object
pointcolor ♦ ♦ ♦ color b Point color data
pointlabels ♦ ♦ ♦ off | on | list of
strings
off
Point label list
pointmarker ♦ ♦ ♦ marker symbol o Point marker
pointmode ♦ ♦ ♦ on | off |
isolated
on
Show points
qualbar ♦ ♦ on | off on Show color bar
qualdlim ♦ ♦ 1-by-2 numeric [0,1] Color limits
qualmap ♦ color map jet Color map
sdl ♦ ♦ integer vector all Subdomain list
In 3D, the properties Sdl, Bdl, Elkeep, Elkeeptype, Ellogic, and Ellogictype
determine what part of the mesh is displayed. Only elements lying in subdomains in
the list Sdl, and boundary elements lying on boundaries in the list Bdl, are shown.
The set of elements is restricted further by the properties Elkeep, Elkeeptype,
Ellogic, and Ellogictype. These affect the patch and wireframe plots of the
elements (controlled by the Edge and Dedge properties). Only the mesh elements
whose corners satisfy the logical expression Ellogic are shown. Ellogictype
determines whether all, some, or some but not all of the corners are required to
satisfy the condition. Only a fraction Elkeep of the mesh elements are shown. The
property Elkeeptype determines whether this fraction is the elements of worst
quality, or if it is a random set of elements.
The El property group controls the display of the actual element. This is only
possible in 1D and 2D. The Edge property group controls the display of the
boundaries of the elements. This visualization type is available in all space
dimensions. In 1D it is done by displaying marker symbols, in 2D it is done by
displaying a wireframe plot of the element edges, and in 3D it is done by displaying
the element edges as patches. In 3D, the property dedge makes it possible to obtain
wireframe plots of the elements.
284 | CHAPTER 1: COMMAND REFERENCE