Performance

48 SUSPENSION www.moss-europe.co.uk London 020 8867 2020 Bradford 01274 539 999
ill. Part Number Price £ea. Description Req. Details ill. Part Number Price £ea. Description Req. Details
Rear Suspension (Dry)
1 FAM3968 £49.96 RUBBER CONE, standard, metric thread 2 genuine Rover
FAM3968RX £62.95 RUBBER CONE, uprated, metric thread 2 use with Hi-Lo kit
FAM3968X £339.95 COIL SPRING KIT, blue 1 softer
(Front and rear coil spring kit that replaces the rubber cone).
FAM3968HX £347.95 COIL SPRING KIT, red 1 firmer
(Front and rear coil spring kit that replaces the rubber cone).
2 21A1684 £Call STRUT 2
GAC8437X £125.95 HILO, suspension kit 1 { adjust height kit
} front and rear
GAC84371 £49.96 HILO TRUMPET 1 { adjustable height
(Includes 2 x Hilo cones & 2 x 21A423). } cones kit
GAC84372 £17.95 RODS, extension, (pair) 1 { used with GAC84371
| when fitting to rear
} suspension
GAC84373 £3.95 ALLEN BAR, rear 1 { adjusting suspension
} height
GAC8433X £91.96 ADJUSTA-RIDE, suspension kit 1 { adjustable height
} kit rear
3 21A1845 £3.35 WASHER a/r { packing to raise
} ride height
4 GSV1118 £2.50 KNUCKLE JOINT 2
21A423 £1.94 CUP 2 suspension knuckle
21A425 £0.86 GAITER 2 suspension knuckle
5 21A640 £Call COVER, top shock absorber mounting 2
6 GSA71542 £15.50 SHOCK ABSORBER 2
GAC84031X £56.10 SHOCK ABSORBER, Spax 2 standard height
GAC84041X £56.10 SHOCK ABSORBER, Spax 2 lowered height
GAC8403XG £48.95 SHOCK ABSORBER, Gaz 2 standard height
GAC8404XG £48.95 SHOCK ABSORBER, Gaz 2 lowered height
MT1302 £22.96 SHOCK ABSORBER, Gmax 2 30% uprated
SPCK19 £768.95 SHOCK ABSORBER KIT, Spax 1 coil over kit
(Height adjustable front and rear kit standard height).
SPCK20 £768.95 SHOCK ABSORBER KIT, Spax 1 coil over kit
(Height adjustable front and rear kit lowered height).
7 517984 £1.20 WASHER, lower bush retaining 2
8 517985 £1.06 BUSH, lower top, s/absorber 2
9 GZS1477 £1.15 BUSH, upper top, s/absorber 2
10 517984 £1.20 WASHER, upper bush retaining 2
11 GHF273 £0.20 NUT, nyloc, top s/absorber mount 2
12 21A504 £2.35 SLEEVE, bottom s/absorber bush 2
13 21A1230 £1.75 BUSH, bottom s/absorber mounting 2
14 AJD7162 £0.30 WASHER 2
15 GHF223 £0.25 NUT, nyloc 2
16 GSV1125 £12.95 REPAIR KIT 2 radius arm fulcrum pin
Note: GSV1125 requires a special tool for reaming after installation of the bearings. The special
reamer 18G588 is NLA. However reconditioned and new radius arms are available. See below.
ACA9099 £8.12 SHAFT, radius arm 2
17 UHN400 £0.66 GREASE NIPPLE, fulcrum pin 2
18 FNZ508 £1.10 NUT, fulcrum pin 4
19 GHF335 £0.20 WASHER, locking 4
20 2A7327 £1.01 SEAL, radius arm 4
115702SP £3.60 SEAL, poly version of 2A7327 4
Rear Hub & Stub Axle
21 21A2023 £31.25 HUB, with short studs 2 { 10” wheels
} To 1984
RLH10021 £Call HUB, with long studs 2 { 12” wheels
} 1984-On
21A2023XR £94.96 HUB, alloy, with long studs, red 2 includes bearings
21A2023XB £94.96 HUB, alloy, with long studs, blue 2 includes bearings
22 21A2064 £0.82 WHEEL STUD, short 8 { 10” wheels
} To 1984
RLJ10001 £0.97 WHEEL STUD, long 8 { 12” wheels
} 1984-On
23 GHK1548 £11.95 HUB BEARING KIT, taper roller type 2 heavy duty
26 BTA672 £6.20 WASHER, hub 2
28 GHS227 £2.65 SEAL, grease 2 all models
29 NL610041 £7.96 NUT, RH hub 1
FNN2410 £2.95 NUT, LH hub 1
30 ATB4098 £5.26 GREASE CAP 2
31 88G322 £0.70 WHEEL NUT, round chamfer 16 standard 10” wheels
113087 £3.01 WHEEL NUT, 60° chamfer angle 16 standard 12” wheels
FAM5701 £7.85 WHEEL NUT, round chamfer* 16 10” with hub caps
FAM3428 £Call WHEEL NUT, 60° chamfer* 16 12” with hub caps
RRD10009 £4.55 WHEEL NUT, 60° chamfer 16 Rover alloy wheels
(Feature a loose washer and stainless cap).
*Note: If your car is fitted with wheel trims retained by the wheel nuts, you will require
wheel nuts marked with an asterisk. Care must be taken when ordering as ‘radius’ and
‘chamfered’ wheel nuts are not interchangeable!
32 2A7351 £Call STUB AXLE, RH, rear 1
2A7364 £Call STUB AXLE, LH, rear 1
33 2A7352 £6.50 CIRCLIP, stub axle retaining 2
34 NAM7162 £224.30 RADIUS ARM, RH, new 1
NAM7162N £238.96 RADIUS ARM, RH, new, loaded 1
(Supplied with bearing, reamed bush, shaft and seals).
NAM7162R £42.95 RADIUS ARM, RH, reconditioned 1
(Refundable surcharge on this item - old unit required).
NAM7163 £224.30 RADIUS ARM. LH, new 1
NAM7163N £238.96 RADIUS ARM, LH, new, loaded 1
(Supplied with bearing, reamed bush, shaft and seals).
NAM7163R £42.95 RADIUS ARM, LH, reconditioned 1
(Refundable surcharge on this item - old unit required).
21A1577Z £56.95 HYDROLASTIC PIPE, suspension 2 universal replacement
MTR4201 £28.96 GAUGE, camber measuring 1
(This gauge allows you to correctly set up your suspension
to get the best from your Mini where it excels).
21A1517 £Call BUMP STOP, cone type 2 original
21A1520 £13.20 BUMP STOP, flat type 2 alternative