Basic Rooftop Focus Guide.pdf - ProLon

More documents

Recommendations

Info

Basic Rooftop Controller www.prolon.net • Reset Device: Causes the device to perform a reset. All configuration properties REMAIN SAVED. However, resetting the controller removes all active overrides. This function is useful for recalibrating the damper or for other debugging purposes. • Reprogram: This function is used to upgrade the controller with a new software version. Focus will begin by asking you for the HEX file that contains the software update. Software update HEX files can only be provided by ProLon. At the end of the procedure, Focus will automatically reapply all the parameters you have previously configured into the device. 32 www.prolon.net info@prolon.net
Basic Rooftop Controller www.prolon.net 2.2 Network Menu A ProLon Master (Basic Rooftop, Advanced Rooftop and Heatpump) controls and manages the ProLon Slaves (VAV Controller, Thermostat, Boiler Controller and Humidifier Controller) on its system. The data exchanged between the master and its slaves is used to calculate the math functions, control the occupancy, activate morning warm up functions, and much more. Therefore, a proper network configuration is an important element in any zoning system. The Network menu, which can be found at the top of the configuration screen of any master, gives you access to the network configuration screens, which are explained in this section. 2.2.1 Slave List Figure 2.2.1: Slave list configuration screen Used mostly for offline configuration, in this screen you can manually add slaves from your Focus network list to the master’s slave list. • System List: The list of slave icons already existing in the selected system. All icons already created on this masters system will be found here. • Master’s List: The list of slaves that the master is aware of. If a slave is not on the master’s slave list, the master will NOT attempt to communicate with it. This means that the demand of this slave will not be included in any math function calculation, and it will not receive the system-shared supply temperature or occupancy status. In addition, ProLon Focus will NOT be able to communicate with the slave (its icon 33 www.prolon.net info@prolon.net
Page 1 and 2: Focus Guide Basic Rooftop Controlle
Page 3 and 4: Basic Rooftop Controller www.prolon
Page 31: Basic Rooftop Controller www.prolon

Basic Rooftop Focus Guide.pdf - ProLon

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?